In this article, we explore an easy fix for Epson printer clogging issues. The customer in the video had a clogging issue with their printer and contacted Epson for warranty. Epson offered the customer $120 to keep the printer. The customer then sought the help of BCH Technologies, who fixed the issue by cleaning the tubes, priming the damper, and making sure the tubes were connected properly.

The tubes were disconnected from the printhead and then from the other side. To clean the tubes, they were removed and soaked in warm water, then given a little massage, and finally, the end was sucked. BCH Technologies recommends visiting their website at BCHtechnologies.com to purchase a new set of tubes or a four-piece refill needle tip.

The damper was primed by using a 10 ml syringe and a razor blade to cut off a little piece from the top. The damper was held in one hand and the syringe was inserted to suck the ink. The ink should come into the damper easily and continue to be sucked until the syringe was filled with ink.

Once the tubes and damper were properly connected and primed, the printer was able to print good pictures continuously without any more clogging issues. The old problem of the printer suffocating after the first page was solved.

In conclusion, if you are facing clogging issues with your Epson printer, don't worry. With the help of BCH Technologies, you can solve the problem easily and get your printer back to its top performance. Visit BCHtechnologies.com or their local store in Greensboro North Carolina for all your printer needs.