Blog

Today we’ll be looking at how to take the cover off of an Epson Workforce Pro WF-6090. This printer is very large, so working with it can be intimidating. Don’t worry, though, because I’m here to walk you through it.Opening this printer is relatively easy compared to some other models. You start at the back of the printer, where you’ll have to remove four screws. After you’ve done this, lift the back paper guard, where you should find two more screws on the top, which you will also need to remov …

I’ve talked a few times about the Epson error code 0xEA, and I'll be addressing it again today. Last time, I mentioned checking the clear reader belt, and many people were confused regarding it and didn’t understand what I was talking about. So hopefully, today I can clear that up a bit with some more information.What does this error code mean? The problem that this error code is trying to indicate is that the printhead doesn’t know how far it’s traveled or what its current position is. This is …

Looking For a New Printhead? Secret Tips You Should Know For Buying a Printhead If you’re a printer owner, you’re likely to need to replace the printhead at some point. BCH offers printer repair services, but there are many kinds of printheads, and I don’t stock them all. Therefore I have extensive experience on purchasing printheads online.  Here are few tips that I want to share. If you buy a printhead from Amazon, make sure that it’s covered under Prime. If it’s not, it’s shippi …

Print Carriage Stuck on the Right & Fake Paper Jam Error Are you dealing with a print carriage jam error in your printer? It's so frustrating to see an error in the middle of a printing job. It's even more frustrating to check and re-check the problem as stated in the error message only to realize that the error message must be wrong! Sadly, a carriage jam error happens frequently with the HP OfficeJet Pro 9000 series printers. The error message indicates a paper jam. However, there is no pa …

A while ago, I made a video regarding the 0x69 error code, so today, I’ll be revisiting that and giving a bit of an update. This error comes up because when you start the printer, the printhead has no idea where the printhead is. This failure will cause the printhead to move all the way to the right before suddenly slamming to the left.The printhead always tries to go to the right when you start your printer. In this scenario, it either gets stuck on something or gets confused and decides that i …