Electronic Boards & Assy

Only parts in the pictures are included.  What you see is what you get. This one has a connector horizontal to the board (see picture). Do not confuse it with vertical connector models. The vertical connector is for you to plug the board directly...

The CSIC holder is a crucial component used in inkjet printers that contains the cartridge chip. This chip is a small circuit board that communicates with the printer and relays information about the ink levels in the cartridges. The CSIC holder secures...

Replace the bit "10" fuse for L1800, 1390...    

Fix EcoTank, L1800, & WorkForce "no power" problem. This problem is not always at the fault of the power supply. You may have a blown-out mainboard. If your board has those two transistors, you can fix the electronic problems in Epson inkjet easily...

Fix EcoTank (e.g., ET-2550, ET-3750) & WorkForce "no power" problem. This problem is not always at the fault of the power supply. You may have a blown-out mainboard. If your board has those two transistors, you can fix the electronic problems in...

FFC combo for Epson Wide Format WorkForce Printers that uses 252 cartridges (T1881 printhead), such as WF-7210 WF-7218 WF-7610 WF-7620 WF-7621 WF-7710 WF-7720 in the USA and other models in Europe. These FFC cables are often damaged due to a power...

Too many to list. It can also be known as F2, F3, F301, F201, Fxxx. If it's an "F", and looks tiny, it is this fuse. If you get 0x9A or 031006, you probably have a blown printhead and a burnt FFC cable as well. Please be cautious as this component is...

FFC combo for Epson printead: 1390 1400 1410 1430 R360 R380 R390 R270 R360 R380 R390 RX580 RX590 L1800 1500W EP4004   These two FFC cables are often damaged due to a power failure. The two cables will be bundled and folded and ready for use...

Length: 6 cm Wire only.  WiFi Card not included (Get it here).

Package includes: 1 x 9-Pin CSIC Assembly Replace broken CSIC pins on ECB (Epson Cartridge Board).  Epson's contact pins are notoriously easy to break.  When the pin break, it creases "cartridge cannot be recognized" error.  Instead of...

FFC cable bundle (3 cables) to connect to Epson's printhead carriage (CR frame). This is all the cables that goes into the CR frame.  There should be 3 of them, two control printhead's printing and one controls the cartridge CSIC reading...