Today, we delve into a perplexing printing issue encountered by a user of the Canon Pixma iX6820, shedding light on an unexpected workaround for achieving sharp prints. The community discussion unfolded on a popular printer knowledge forum, and the problem revolves around black ink misalignment and blurriness, initially suspected to be a result of a faulty printhead.

Unraveling the Mystery

The user, after receiving a B200 error message, decided to replace the printhead with a genuine Canon replacement sourced from www.inkjetprinthead.com. However, a twist emerged during test prints conducted on various papers, revealing a surprising revelation. While prints on plain paper appeared razor sharp, those on Canon "Pro Luster" and inexpensive glossy paper exhibited the nagging misalignment issue.

The Unexpected Fix: Plain Paper Setting

The turning point came when the user realized that choosing the "plain paper" media type, even for specialty papers like Pro Luster or glossy, miraculously produced sharp prints. The color balance and exposure suffered, as expected when using the wrong paper type setting, but the black ink misalignment issue vanished. This led to a conundrum—was the printhead truly at fault, or was there a deeper technical nuance at play?

Technical Insight: The Black Printhead Conundrum

The community stepped in to dissect the issue. A knowledgeable contributor highlighted that the problem might be rooted in the photo black position. Opting for "plain paper" forced the printer driver to utilize the pigment black position, seemingly resolving the issue. Further examination of the nozzle check revealed telltale signs of thermal damage to the BK (black) nozzles, specifically impacting the vertical bars on either side of the "BK" letters.

The Printhead Diagnosis

According to insights from druckerchannel.de, this thermal damage is linked to the ink's cooling properties, particularly with the PGI-x50/CLI-x51 generation printheads. These are notably sensitive to ink-related failures, such as the PGBK (pigment black) nozzles exhibiting double vertical lines. The consensus: a defective printhead.

Importance of Timely Action

While the B200 error had been addressed, community advice stressed the urgency of removing the defective printhead immediately. The intermittent nature of the B200 error could evolve into a permanent issue, potentially damaging the logic board and rendering the printer irreparable. Notably, a damaged logic board might jeopardize the functionality of a new printhead.

Ink Matters: The Role of PGBK

A critical revelation emerged regarding the use of pigment black ink (PGBK). This ink, sharper and more water-resistant than dye/photo black ink (BK), is exclusive to plain paper. PGBK, unsuitable for photo paper due to poor adhesion, ensures optimal performance when plain paper is selected. In contrast, when other media types are chosen, the printer defaults to using the dye black ink (BK).

To Print or Not to Print: The Dilemma

Armed with this newfound understanding, the user faces a decision regarding the $125 replacement printhead. The dilemma persists—will it truly rectify the peculiar sharpness issue experienced with other paper types, or is the workaround of selecting "plain paper" the key to consistent print quality?

Take Action and Stay Informed

As this intriguing saga unfolds, it's essential for users to stay informed about the technical nuances that can impact print quality. For those eager to explore visual representations of the discussed prints and contribute to the ongoing dialogue, refer to the original post here.

Join the Tech Exploration

For more insightful discussions and troubleshooting tips, consider subscribing to our YouTube Channel at BCH Technologies or following our tech blog. Alternatively, if you find yourself in Greensboro, North Carolina, explore local resources to enhance your tech journey.

Stay tech-savvy, and may your prints be as crisp as your insights!