Roll over image to zoom in
Ready-to-Use Bulk (1,000 ml) BCH MaxStrength™ RED Professional Cleaning Solution for Water-Based Inks: Dye, Pigment, Sublimation - NOT FOR SOLVENT INK
Dissolve stubborn clogs and restore dried print nozzles. The only cleaning solution designed to work from the inside (and outside) of the printer. Work with all printers using dye, pigment...
$89.99 $129.99
SKU:
AS-CLEAN-ReadyR1K
Categories:
Tags:
Dissolve stubborn clogs and restore dried print nozzles. The only cleaning solution designed to work from the inside (and outside) of the printer. Work with all printers using dye, pigment or sublimation ink: Canon, HP, Epson, Brother,...
CAUTION. THIS PRODUCT IS FOR PROFESSIONAL USE ONLY!
An industrial-strength printhead cleaner to remove pigment, dye, and sublimation clogs. Do not buy it if you've never done unclogging before. There is no instruction nor tutorial because we assume you are a pro and know how to use it. This is the strongest cleaning solution that we make. If a printer cannot be saved with this solution, it can't be saved. For minor clogs, please use the other two solutions (clear or green) because they are more economical.
Volume: 1,000 ml
Diluting ratio: already diluted to the proper ratio, ready to use.
Instructions:
1) Add the solution. This product is designed to work from the inside of a printer. To deliver the solution into the printhead, you can fill an empty cartridge with the solution and use the printer's built-in function to clean the printhead. Otherwise, you can use a flushing tool to push the liquid inside the printhead.
2) Wait 12 hours. Leave the solution in the printer for 12 hours.
3) Replace the solution. Refill the printer with regular ink, do 3-5 printhead cleanings. If the problem persists, repeat.
Warning:
* This product is NOT a solvent cleaner/thinner. Please do not use it for solvent, eco-solvent, and UV inks.
* Please do not leave it at 100% concentration inside a printer for more than 24 hours. The solution can be left longer at a lower concentration (mix with ink). You can dilute this solution at any ratio. For example, a 50% dilution = 24 hours max.
* Do not heat it. Use it at room temperature. The protective coating ingredients in the solution will evaporate at a temperature > 95 F.
* Put the lid back while not using it.
* The solution is not a miracle juice.
See it in action:
#1: Epson printer with Dye OEM ink:
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
Best thing ever!! i used to put cleaning solution in the capping station with a syringe/hose then had to suck out f the wast line with a syringe.... over and over until the capping station was clean. maybe up to 10 times. now i just use maybe 1 or 2 - 30ml syringes full of water and the pump cleans it out so good.... then I put capping solution, place printhead over capping station and turn on the back of the machine. thats it. when i print again, usually next day, I pull from waste tank a few times until I get ink, then i run 1 head cleaning , print a test strip and usually good to go. I sometimes print a 2nd test strip. SO MUCH easier to use this little pump. so glad I bought it.
RUTH FIGUEROA
TMS Printhead Maintenance System by BCH: Comprehensive Cleaning and Maintenance Solution
This is a must have modification to save time troubleshooting. You will need to download Kevin's capping station video to disassemble the capping station. A definite must. You will also need a few other connections to hook this up. All parts are linked in his videos. Pro tip. Have patience and go slow. This modification will save you from a lot of headaches . I did this mod on Procolored L1800 about a year old . Thanks Kevin.
Vincent Kretlow
Waste Ink Collection Tank Combo with Small Tube for Epson (AS-EP-WASTE-25MM)
I purchased this product and messed it up first time. I somehow got superglue onto the main circuit board on the colour cartridge and for some reason (not sure how) I messed up the black one too. I repurchased the product (x2). I tried again with the colour one first (which is meant to be the most difficult). I was careful to wrap the circuit board and print head in cling film and taped it down on top. I was careful with the superglue and let it dry upside down for 24 hours so that if the glue leaked anywhere it wouldn't go towards the circuit board. It works great. I now have a functioning refillable colour cartridge. I am glad I got the hardest one out of the way first. I will shortly try the black one. But fantastic that overall, I know this product will save me a fortune in printing now. The colour one is obviously the hardest and it works! Good job guys. (I am from the UK which is why we spell colour with a u lol).
Daniel Cunningham
Modification Kit for Making Spongeless Cartridge with Canon PG-210 CL-211 PG-240 CL-241 PG-245 CL-246 PG-243 CL-244 PG-260 CL-261 PG-275 CL-276