Epson ET-15000 Reassembly: What to Do When a Part Is Left Over
- By Ellen @BCHTechnologies
- On Oct 08, 2026
- Comment 0
Question:
After taking apart an Epson ET-15000, what should I do if I have a piece left over and do not know where it goes?
Answer:
Thank you for contacting BCH Technologies. We're sorry we couldn't answer sooner. Printer problems can be urgent, and we want to give each question careful thought so we can provide a detailed answer. Thank you for supporting BCH Technologies and the BCH Technologies YouTube channel.
The video covers uncasing the Epson ET-15000 and removing the printhead and FFC cables. The comment does not show or describe the leftover piece, so its location and purpose cannot be identified from the information provided. Do not force it into a slot or assume it is excess packaging; a small bracket, clip, screw, or cable guide can affect alignment or electrical connections.
Before powering the printer, compare the part with the video's reassembly views and any photos taken before disassembly. Check the shape, screw holes, tabs, and nearby connector positions. Keep screws and small parts grouped by the step where they were removed. If the piece may be part of the printhead carriage or an FFC cable retainer, avoid bending or reconnecting cables until you confirm their orientation and locking tabs.
If you cannot identify the part with confidence, stop reassembly and take clear photos of the piece from both sides and the open printer area where it may fit. The model-specific service information or a technician can help identify it. Do not operate the printer with an unidentified internal part remaining; a misplaced part or unsecured cable could cause damage.
Search the BCH Technologies YouTube channel for "ET-15000 disassembly," "ET-15000 printhead," or "FFC cable" for related videos. See the BCH Technologies YouTube channel [https://youtube.com/@bchtechnologies].
If the part may be related to the printhead, carriage, or FFC connection and you cannot confirm its location, professional inspection is recommended before powering on the printer. See the BCH Technologies printer repair services [https://bchtechnologies.com/collections/printer-repair-service].