Roll over image to zoom in
Silver Cover 0307 MOSFET Pair for Epson 041B Printhead Driver (2 Pieces) for ET-8550 XP-15000 ET8550 XP15000
041B Driver Chip Not Included - Sold as a Pair These silver cover MOSFETs are the power-stage components used alongside the Epson 041B printhead driver chip. The 041B uses two...
$12.99
041B Driver Chip Not Included - Sold as a Pair
These silver cover MOSFETs are the power-stage components used alongside the Epson 041B printhead driver chip. The 041B uses two MOSFETs working together as a pair, and these chips are sold in matched sets of two to ensure proper functionality and reliability during repairs.
Important Notes for ET-8550 & XP-15000 Owners
Both the Epson ET-8550 and XP-15000 contain two separate 041B driver chips, identified on the board as:
IC800
IC801
Each 041B requires one pair of MOSFETs (2 pieces).
Therefore:
ET-8550 → Requires 2 pairs (total 4 MOSFETs)
XP-15000 → Requires 2 pairs (total 4 MOSFETs)
If you plan to fully refresh or repair the power stage for both 041B driver ICs, be sure to order the correct quantity.
Why These MOSFETs Are Required
When these MOSFETs fail, the printer typically:
Prints completely blank
Shows no error messages
Sounds normal but no ink reaches the paper
Fails all nozzle tests with no lines printed
These symptoms occur because the MOSFETs control the high-current power that activates the printhead. A failure here cuts power without triggering any detectable system fault.
Replacing both MOSFETs together is the correct repair method, as they age and fail as a pair.
Product Details
Type: Silver cover MOSFET pair (2 pieces)
Compatibility: Works with Epson 041B printhead power driver
Quantity per order: 2 MOSFETs (one pair)
041B Driver Chip: Not included
Intended for restoring printhead power on Epson printers using 041B-based power stages.
Package Includes
2 × Silver Cover MOSFETs (Matched Pair)
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
Best thing ever!! i used to put cleaning solution in the capping station with a syringe/hose then had to suck out f the wast line with a syringe.... over and over until the capping station was clean. maybe up to 10 times. now i just use maybe 1 or 2 - 30ml syringes full of water and the pump cleans it out so good.... then I put capping solution, place printhead over capping station and turn on the back of the machine. thats it. when i print again, usually next day, I pull from waste tank a few times until I get ink, then i run 1 head cleaning , print a test strip and usually good to go. I sometimes print a 2nd test strip. SO MUCH easier to use this little pump. so glad I bought it.
RUTH FIGUEROA
TMS Printhead Maintenance System by BCH: Comprehensive Cleaning and Maintenance Solution
This is a must have modification to save time troubleshooting. You will need to download Kevin's capping station video to disassemble the capping station. A definite must. You will also need a few other connections to hook this up. All parts are linked in his videos. Pro tip. Have patience and go slow. This modification will save you from a lot of headaches . I did this mod on Procolored L1800 about a year old . Thanks Kevin.
Vincent Kretlow
Waste Ink Collection Tank Combo with Small Tube for Epson (AS-EP-WASTE-25MM)
I purchased this product and messed it up first time. I somehow got superglue onto the main circuit board on the colour cartridge and for some reason (not sure how) I messed up the black one too. I repurchased the product (x2). I tried again with the colour one first (which is meant to be the most difficult). I was careful to wrap the circuit board and print head in cling film and taped it down on top. I was careful with the superglue and let it dry upside down for 24 hours so that if the glue leaked anywhere it wouldn't go towards the circuit board. It works great. I now have a functioning refillable colour cartridge. I am glad I got the hardest one out of the way first. I will shortly try the black one. But fantastic that overall, I know this product will save me a fortune in printing now. The colour one is obviously the hardest and it works! Good job guys. (I am from the UK which is why we spell colour with a u lol).
Daniel Cunningham
Modification Kit for Making Spongeless Cartridge with Canon PG-210 CL-211 PG-240 CL-241 PG-245 CL-246 PG-243 CL-244 PG-260 CL-261 PG-275 CL-276