Roll over image to zoom in
Silver Cover MOSFET Pair for Epson 041B Printhead Driver (2 Pieces) for ET-8550 XP-15000 ET8550 XP15000
041B Driver Chip Not Included - Sold as a PairThese silver cover MOSFETs are the power-stage components used alongside the Epson 041B printhead driver chip. The 041B uses two MOSFETs...
$12.99
041B Driver Chip Not Included - Sold as a Pair
These silver cover MOSFETs are the power-stage components used alongside the Epson 041B printhead driver chip. The 041B uses two MOSFETs working together as a pair, and these chips are sold in matched sets of two to ensure proper functionality and reliability during repairs.
Important Notes for ET-8550 & XP-15000 Owners
Both the Epson ET-8550 and XP-15000 contain two separate 041B driver chips, identified on the board as:
ET-8550: IC800 and IC801
XP-15000: IC80 and IC81
Each 041B requires one pair of MOSFETs (2 pieces).
Therefore:
ET-8550 → Requires 2 pairs (total 4 MOSFETs)
XP-15000 → Requires 2 pairs (total 4 MOSFETs)
If you plan to fully refresh or repair the power stage for both 041B driver ICs, be sure to order the correct quantity.
Why These MOSFETs Are Required
When these MOSFETs fail, the printer typically:
Prints completely blank
Shows no error messages
Sounds normal but no ink reaches the paper
Fails all nozzle tests with no lines printed
These symptoms occur because the MOSFETs control the high-current power that activates the printhead. A failure here cuts power without triggering any detectable system fault.
Replacing both MOSFETs together is the correct repair method, as they age and fail as a pair.
Product Details
Type: Silver cover MOSFET pair (2 pieces)
Compatibility: Works with Epson 041B printhead power driver
Quantity per order: 2 MOSFETs (one pair)
041B Driver Chip: Not included
Intended for restoring printhead power on Epson printers using 041B-based power stages.
Package Includes
2 × Silver Cover MOSFETs (Matched Pair)
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
I can’t say enough about this company! Sent my main board in for repair and they were fast and the cost was reasonable. They are also quick to respond. This is not the first item I’ve purchased from them and won’t be the last. Also, the YouTube videos are a must to watch!
Nancy Donaldson
Fast Track Mainboard Repair: L1800, XP-15000, ET-15000, WF-7610 7620, WF-7110, WF-7710 7720, ET-8550, ET-2720, ET-2750Printer Mainboard, Formatter Board, Motherboard Troubleshooting and Repair
I have an old Epson ET-2750 eco tank printer, which I have used for years, and since it is uses refillable ink tanks, have used very little ink over the years. I love this printer because I can print lots and lots of pages, including double-sided at very low cost, and it is very reliable. I recently had a paper jam, which is very unusual. When I took off the back panel to clear the jam, I accidentally dropped it on the floor, and when I replaced the back panel, the printer jammed every time I tried to print double-sided. I found a small plastic piece on the floor that fit on one end of the roller, but didn't realize I was missing the other end. I eventually noticed that there was a gear on the back panel next to where the roller fits into the panel. I deduced that I must be missing a gear to pop into the end of the roller, to mesh with the gear on the panel. I couldn't find the missing gear anywhere, and figured my cats must have lost it or my wife might have swept it up when sweeping the floor, and discarded it. Through a Google search, I found BCH Technologies, ordered the part from them, it fit perfectly, and now I can print double-sided again on my faithful old Epson printer. I very much appreciated being able to get the missing part from them. I thought the price for the part and shipping was high for such a small part, but that was the only down side.
Daniel Parker
Duplex Roller Feed Gear for Epson Printers
Best place for parts and accessories I ordered this print head carriage after watching a few bch videos wanted to fix and upgrade my cr encoder sensor while i was at it and i was not let down censor is original and whole assembly is new and never been used could not be happier thank you thanks Kevin!!
Josie Franco
New Genuine L1800 Printhead Carriage Return (CR) Unit