Canon Pixma TS3722 Error 1430: Troubleshooting Refilled Ink Cartridges

Customer Question:

I have a Canon Pixma TS3722 and recently attempted to refill the black starter cartridge (275) with premium dye ink. After refilling, my printer displayed error 1430, stating that the cartridge is either not recognized or faulty. I have tried pressing the stop button multiple times, but I still cannot print. Can this cartridge not be refilled? What should I do next?

Answer:

Thank you for reaching out to us! We apologize for not being able to respond sooner. We understand that printer issues can be frustrating, and we want to provide you with the best possible solution. At BCH Technologies, we truly appreciate your engagement and support, particularly with our YouTube channel (https://youtube.com/@bchtechnologies). Your feedback helps us enhance our expertise and create better resources for users like you.

Understanding Canon Pixma TS3722 Error 1430

Error 1430 occurs when the printer does not recognize the cartridge, often due to:

• Electrical connection issues between the printer and cartridge

• A faulty or incompatible cartridge chip

• Excess ink contamination on the contact points

• Cartridge reaching end-of-life due to internal resistor failure

Step-by-Step Troubleshooting

Here are the steps to fix the issue and determine if your cartridge can be saved:

1. Check and Clean Cartridge Contacts

• Remove the black 275 cartridge from the printer.

• Locate the golden contact chip (electronic ribbon) on the back of the cartridge.

• Use a lint-free cloth or paper towel with isopropyl alcohol to clean any ink residue or adhesive that might interfere with the connection.

• Also, inspect the brass contact pins inside the printer to ensure they are clean and dry.

• Reinstall the cartridge and try printing again.

2. Re-seat the Cartridge

• Sometimes, the connection is weak. Try removing and reinserting the cartridge several times to establish a better connection.

• Close the printer lid and check if the 1430 error disappears.

3. Reset the Printer

If cleaning and re-seating do not work, attempt a reset:

• Turn off the printer and unplug it from the power source.

• Wait for about 5 minutes before plugging it back in.

• Hold the Stop button for 10 seconds while turning the printer back on.

• Release the Stop button and check if the error clears.

Why Some Canon Cartridges Fail After Refilling

Canon’s starter cartridges are designed for single use, and refilling them does not guarantee long-term usability. The printer checks the condition of the cartridge by measuring the resistance of a reference resistor inside the cartridge. If the nozzle resistance deviates too much, the printer will detect it as a failure and block further use.

If you’ve tried the above steps and the printer still does not recognize the cartridge, the cartridge may be permanently locked and needs to be replaced.

Where to Get Reliable Empty Cartridges for Refilling

If you need a new empty cartridge for refilling, we recommend searching for “Canon 275 empty virgin” on eBay or online marketplaces. A virgin cartridge is one that has never been refilled before, making it ideal for refilling purposes.

What to Avoid:

• Remanufactured cartridges: These often come with a third-party chip that can fail when exposed to ink or moisture.

• Cheap refilled cartridges: Some vendors recycle OEM cartridges with pre-existing faults, leading to potential failures after refilling.

Final Thoughts

Addressing printer issues can be a complicated affair due to the hands-on nature of the problems. We are not able to provide remote troubleshooting, suggestions, or support for printer repairs. However, we do offer an in-person evaluation and repair service via our local diagnostic facility (BCH Printer Repair Service(https://bchtechnologies.com/printer-repair-service)). Given the high demand, we operate on a first-come, first-served basis, and it may take a few weeks before your printer can be dropped off.

Our services cover full printer repairs or specific part replacements, with clear instructions on how to proceed. However, we acknowledge that our rates may not be the most economical option. Therefore, we highly recommend exploring self-help solutions via online research. You can start by checking our YouTube channel(https://youtube.com/@bchtechnologies). Use the search function next to “About” on the menu bar to find specific troubleshooting videos.

We appreciate your patience and support. If you have further questions, feel free to ask! Thank you for reaching out to BCH Technologies.