Printhead Adapter Boards for L1800 and Stylus 1430 Printers

Question:
I have asked this already, but do you have the adapter board for switching between printheads? I don’t want to buy it from AA Print Supply since they ship trash. This one is for a Galaxy DTF printer with a Stylus 1430 printhead. Do you also have the wide ribbon cable that attaches to the printhead?
 
Answer: 
Thank you for contacting us and for your ongoing trust in BCH Technologies. I'm sorry the answer took so long; we spent some time on each question. Printer queries are always time-sensitive, which means we look to offer the most detailed, specific help possible. Thanks for reading our newsletter and supporting our quest to grow our technical know-how and learning by clicking on our YouTube BCH Technologies (https://youtube.com/@bchtechnologies)—your efforts keep ICC resources up and running.
You must be looking for the guys' Printhead Conversion Breakout Board L1800 1390 to L805 L800 Adapter Riser Card. This adapter board is for UV, DTF, or DTG printers with Epson L1800 and R1390 motherboards. It allows you to conveniently switch between Epson L805 and L800 printheads, making it a more affordable solution than buying the costly Epson L1800 and R1390 printheads.
 
Essential Elements of the Adapter Board:

• Compatibility: Works with UV, DTF, and DTG printers.
• Compatible Models: This is Compatible with Epson L1800 and R1390 motherboards and L805 and L800 printheads.
• Cost Saving: It enables the L805/L800 printheads to be utilized instead of the expensive L1800/R1390 ones, or alternatively, it can save around 50% on print costs.

Package Includes:

• One adapter board
• You can use two short cables (the product pictures will help identify these).

Installation Instructions:

• L1800 Cable Connection: Insert the L1800 cable into the wider connection side of the board.
• L805 printhead: Use the small connection side.
• Cable Orientation: All four cables should be oriented so that the blue side is toward the board and the silver side is facing away (up).
• The last thing you can do is Take those two short cables and connect them securely to your L805 printhead. Once you've done this, your printer will be ready to print.
• Fallback Mode: The firmware can be reverted to its original setup by removing the adapter board to use the stock L1800 or R1390 printheads.

Additional Note:
This does not include the original L1800 printhead cable from the mainboard to the printhead. If you need a wide ribbon cable or other accessories, please specify the cable configuration, and we will direct you further.
 
Printer issues can be quite a hassle because they involve physical interactions. As a result, we cannot offer actionable suggestions for troubleshooting or repairs for your printer remotely. In addition, we provide both in-person assessment and repair services through our local diagnostic solution (https://bchtechnologies.com/printer-repair-service /). However, due to the high volume, we offer a first-come, first-served solution. You might not be able to drop off your printer for several weeks.
Thanks again for contacting us and for doing your best to keep your printer running! If you have more questions or need more help, feel free to reach out. Your trust and feedback allow us to keep improving and supporting the community!