How to Set Up a Waste Ink Tank System for the Epson R2880 Printer
- By Kevin Day
- On Dec 12, 2024
- Comment 0
Question:
I need a waste ink tank system for my Epson R2880 printer. I understand it has two pipes that need to connect to two separate bottles or combine into one pipe with a Y connector. I’ll also need two straight joiners. Do you sell a kit that fits this setup? Additionally, could you provide the inner and outer dimensions of the tubes? I plan to drill holes in the printer case for the tubes, but I need to know their size.Answer:
Thank you for contacting us with your question about setting up a waste ink tank system for your Epson R2880 printer. I'm sorry for not addressing your question sooner, as I know printer issues are often time-sensitive. At BCH Technologies, we value your engagement and feedback, mainly through our YouTube channel [https://youtube.com/@bchtechnologies], which helps us continue improving and expanding our technical expertise.Let’s analyze your request and provide you with details and recommendations for your waste ink tank system setup.
Tube Size and Compatibility
For the Epson R2880, we offer waste ink kits in two sizes:-
2.5 mm Diameter Tubing:
- This is the recommended size for your Epson R2880 printer, which has a 2.5-mm-diameter output tube.
- If you have two output tubes, you will need two 2.5 mm tubes or a Y connector to combine them.
-
4.0 mm Diameter Tubing:
- While this size can also be used, adapters may be required to fit the printer’s original output tubes.
Installation Tips
-
Drilling Holes for Tubes:
- When drilling holes in the back of the printer case, please make sure the drilled diameter matches the tubing's outer diameter (O/D).
- For 2.5 mm tubing, the O/D is slightly larger than 2.5 mm to accommodate the wall thickness.
-
Connecting the Tubes:
- You can use the straight connectors for seamless extension or for attaching tubes to the waste ink bottles.
- If combining two tubes, use the Y connector included in the kit.
Waste Ink Reset
The waste ink tank is a physical container for collecting waste ink, but resetting the printer’s waste ink counter requires software or hardware tools:-
Software Reset Tools:
- Tools like Inkchip WICReset [https://inkchip.net/wic] are adequate for resetting the waste ink counter.
- We recommend Inkchip for its user-friendly interface and cost-effectiveness.
-
Chip Reset Options:
- If your printer’s waste ink tank has a chip, you may need a dedicated physical chip resetter for that specific model. Software tools cannot reset chip-equipped tanks.
Waste Ink Tank Kits
-
2.5 mm Waste Ink Tank Kit:
- This kit, designed specifically for printers like the Epson R2880, provides all the necessary components, including tubing, straight connectors, and a Y connector.
-
4.0 mm Waste Ink Tank Kit:
- Suitable for printers with more extensive waste ink tubing requirements or when adapting to a different setup.
Additional Resources and Support
Addressing printer modifications like this can be intricate due to the hands-on nature of the setup. While we cannot provide remote troubleshooting or customization support, we offer in-person evaluations through our local diagnostic facility [https://bchtechnologies.com/printer-repair-service]. Services are first-come, first-served, and scheduling may take several weeks due to high demand.For further assistance, explore our YouTube channel [https://youtube.com/@bchtechnologies], where you’ll find tutorials and guidance for similar setups. Using the search bar is an efficient way to find specific videos.
Thank you for contacting us. We’re here to help with any additional questions or needs you may have!