Resolving the E01 330007 Error on Epson WF-2850 Printers: A Step-by-Step Guide
- By Kevin Day
- On Mar 19, 2023
- Comment 0
Are you experiencing the 0x330007 error on your Epson WF-2850 printer? Don't worry; it's a medium-level difficulty error that can be resolved without too much trouble. This article will guide you through the process of fixing the 0x330007 error by reconnecting the cable to the CSIC board. Although we'll be using the WF-2850 as an example, the steps might also apply to other printer models.
Tools needed:
- Dental tool (recommended for at-home printer repairs)
Step-by-Step Guide:
- Power off your printer and disconnect it from the power source to ensure your safety while working on the device.
- Release the hinge that holds the scanner to gain easy access to the printer's internal components.
- Remove two plastic pieces: First, remove the top black plastic piece by pushing forward on the clip and lifting up. Next, remove the side piece by pulling forward on the clip and pushing down. These plastic pieces are held in place by clips, and removing them should be relatively simple.
- Identify the disconnected cable: Locate the cable that has come disconnected from the CSIC board. This is the cause of the 0x330007 error.
- Reconnect the cable: Using a dental tool or another flat tool, carefully straighten out the cable and push it back into the connector on the CSIC board. Ensure the cable is seated correctly and fully connected. Be cautious not to damage the cable while reconnecting it.
- Reassemble the printer: Replace the two black plastic pieces you removed earlier. First, install the side piece by pushing up on the clip. Then, attach the top piece by pushing it straight down.
- Power on the printer: Turn your printer back on and check for any error messages. If the process was successful, the 0x330007 error should be resolved, and your printer should function normally.
Fixing the 0x330007 error on your Epson WF-2850 printer can be an uncomplicated process when you have the right guidance. By following the steps outlined in this article, you can have your printer back up and running in no time. Happy printing!
Remember to visit www.bchtechnologies.com for your printer repair needs or visit their local store in Greensboro, North Carolina.