Resetting Waste Ink Tank Full Message on Canon BIJ2300 Printer
- By Jee Comendador
- On Mar 30, 2024
- Comment 0
Encountering a waste ink tank full message on your Canon BIJ2300 A3/A4 business inkjet printer can be frustrating, especially after investing in repairs or replacements. Fortunately, there are methods to reset this error message and restore functionality to your printer. In this article, we'll explore potential solutions and provide step-by-step instructions for resetting the waste ink tank full message.
Understanding the Issue
The waste ink tank full message typically indicates that the printer's internal waste ink absorber pads are saturated with ink, necessitating a reset to continue printing. However, accessing the reset procedure for Canon printers can be challenging, as it often involves entering a "Service Mode" that is intentionally complicated and varies between printer models.
Identifying the Printer Model
Before proceeding with the reset procedure, it's essential to identify your printer model accurately. The Canon BIJ2300 printer may not have an LCD for user interface, making trial-and-error methods unsafe and impractical. However, if your printer has an LCD, there may be a slightly higher chance of accessing Service Mode safely.
Exploring Reset Procedures
While specific reset procedures for the Canon BIJ2300 may not be readily available, users have shared reset methods for other Canon inkjet printers, such as the BJC-4200. These procedures often involve a combination of button presses and powering on the printer in a specific sequence.
Reset Procedure for Canon BJC-4200
If you're willing to attempt a reset procedure similar to that of the Canon BJC-4200, follow these steps:
- Unplug the power cord from the printer.
- Simultaneously press and hold the power and resume buttons.
- While holding the buttons, plug in the power cord.
- Release the buttons once the printer is powered on.
- Open the front panel of the printer.
- Hold the cartridge and resume buttons simultaneously.
- Press the power button.
- Release all buttons after the printer emits a beep.
- Press the cartridge button (usually green) once.
- Press the resume button.
Verifying Success
After performing the reset procedure, check if the waste ink tank full message has been cleared. You may need to power cycle the printer by turning it off and on again to confirm that the error has been resolved.
Conclusion
Resetting the waste ink tank full message on the Canon BIJ2300 printer can be challenging due to the lack of documented procedures and the complexity of accessing Service Mode. However, by following similar reset procedures for other Canon inkjet printers and exercising caution, it's possible to resolve this error and restore your printer's functionality.
For more tech-related content and troubleshooting tips, consider subscribing to our YouTube Channel BCH Technologies or visiting our tech blog. Additionally, if you're in Greensboro, North Carolina, feel free to visit our local service center for expert assistance with your printer issues.