Making PG-245 CL-246 Refillable Cartridges for Canon Pixma MG - Work Log

Making PG-245 CL-246 Refillable Cartridges for Canon Pixma MG - Work Log

If you own a Canon Pixma MG printer, you're probably aware of the recurring expense of replacing ink cartridges. Not only can this be costly, but it also generates unnecessary waste, contributing to environmental concerns. However, there's a solution that can save you money and reduce your ecological footprint – making PG-245 CL-246 refillable cartridges. In this work log, we'll take you through the process and show you how simple it is to refill these cartridges yourself.

Why Refillable Cartridges?

Refillable cartridges have gained popularity among printer users due to their economic and environmental advantages. By opting for refillable cartridges, you can significantly cut down on printing costs in the long run. Additionally, it helps minimize plastic waste generated by single-use cartridges, making it an environmentally responsible choice.

Required Materials

Before we delve into the process, gather the following materials:

  • PG-245 and CL-246 empty cartridges
  • Refill ink for Canon Pixma printers
  • Ink injection kit with needles
  • Paper towels and gloves (to handle ink spills)

Step-by-Step Refilling Process

For a more comprehensive understanding of the steps, please refer to the video linked below. Here, we'll outline the primary steps involved:

  • Prepare Your Workstation: Find a clean and well-lit area to work on refilling the cartridges. Lay down some paper towels to catch any potential spills.
  • Identify the Fill Holes: Locate the fill holes on your PG-245 and CL-246 cartridges. These are typically located on the top label of the cartridge and are sealed with a plastic plug.
  • Remove the Plugs: Gently remove the plastic plugs from the fill holes using a small tool or a paper clip. Be cautious not to damage the cartridge while doing so.
  • Load the Syringe: Using the ink injection kit, draw the appropriate ink colors into the syringe. Each cartridge has specific colors (cyan, magenta, yellow, and black), so ensure you're using the correct ink for each cartridge.
  • Refill the Cartridge: Carefully insert the needle of the syringe into the corresponding fill hole of the cartridge. Slowly inject the ink into the cartridge until it reaches its maximum capacity. You may refer to the video for more precise measurements.
  • Clean the Cartridge: Wipe off any excess ink from the cartridge surface and the fill holes using a paper towel.
  • Replace the Plugs: Once the cartridge is filled, reseal the fill holes with the plastic plugs. Ensure they are securely in place to prevent any leakage.
  • Install the Cartridge: Place the refilled PG-245 and CL-246 cartridges back into your Canon Pixma MG printer. Follow the printer's instructions to complete the installation process.

Congratulations! You've successfully made PG-245 CL-246 refillable cartridges for your Canon Pixma MG printer. By refilling your cartridges instead of purchasing new ones, you'll save money and contribute to a greener environment by reducing plastic waste.

Please remember to watch the video for a visual demonstration of the entire process. Enjoy the benefits of refillable cartridges and happy printing!