How to Fix the HP Envy 5052 Paper Tray Leg: A Step-by-Step Guide
- By Kevin Day
- On Feb 21, 2023
- Comment 0
If you own an HP Envy 5052 printer, you might have experienced a problem where the printer is unable to detect the paper tray. This can be frustrating and make it impossible to use the printer. In this article, we will show you how to fix this problem by repairing the broken paper tray leg.
To start with, let's identify the problem. The printer cannot detect the paper tray even when it is opened or closed. The reason behind this is a broken paper tray leg. You can check this by flipping over the printer and looking for a missing leg.
The printer has two legs: one pointy leg and one flat-head leg. The pointy leg is the important one and should be on the right when the printer is flipped over. The flat-head leg is not useful and can be broken off.
To fix the broken paper tray leg, you need to order a repair kit that is compatible with your printer model. Every HP printer has a part number, which you can find by flipping over the printer. In this case, the part number is F0V63-40013. Once you have the part number, go to bchtechnologies.com, and look for the repair kit for your printer model.
Once you have the repair kit, it's time to fix the paper tray leg. Flip over the printer, and slide open the paper tray. Then, put a piece of masking tape to mark the spot where the new leg needs to be installed. This will help you align the new leg with the grid.
The new leg is semi-transparent, so you can see where the groove should line up with the grid perfectly. You can use some pieces of tape to secure the new leg in place. Start by securing it on the top and then on the left and right. Once it's secured, close the paper tray, and make sure it inserts smoothly. If there is any obstruction, find out where it is and correct it.
Once you've fixed the paper tray leg, the printer will show you the paper selection manual when you close the paper tray. This means that the problem has been solved, and you can start using your printer again.
In conclusion, a broken paper tray leg can be a frustrating problem that makes your printer unusable. However, with the right repair kit and a little bit of patience, you can fix the problem yourself. We hope this step-by-step guide has helped you repair your HP Envy 5052 printer and get it back to working condition.