How to Fix HP OfficeJet 5255 Tray Open Error and Repair Broken Tray Legs

Are you facing the annoying HP OfficeJet 5255 tray open error and finding it difficult to fix? Don't worry, we've got you covered! In this article, we'll guide you through the process of fixing the HP OfficeJet 5255 tray open error and repairing the broken tray legs.

The HP OfficeJet 5255 printer is a popular choice among users for its excellent features, but it's not without its issues. One of the common problems faced by HP OfficeJet 5255 users is the tray open error. This error usually occurs when the paper tray is not properly inserted or when the tray leg is broken. A broken tray leg can cause the paper tray to not close properly, which leads to the tray open error.

To fix this problem, you'll need to repair the broken tray leg. Don't worry, it's not as complicated as it sounds. Follow these steps to fix your printer's tray leg and get rid of the tray open error:

Step 1: Identify the broken tray leg

First, you need to identify which leg is broken. Look closely at your printer's paper tray and locate the broken leg. The paper tray usually has two legs, and one of them is a pointy leg while the other is a flat head.

Step 2: Remove the paper tray

Once you've identified the broken leg, remove the paper tray from the printer. Make sure to unplug the printer from the power source before doing this.

Step 3: Create a new tray leg

To repair the broken leg, you'll need to create a new leg. You can use a piece of metal wire or a paperclip to create the new leg. Bend the wire or paperclip into the shape of the original leg. Make sure the new leg is the same length as the other leg.

Step 4: Insert the new leg

Insert the new leg into the slot where the original leg was located. Make sure the groove of the new leg lines up with the grid perfectly.

Step 5: Secure the new leg

Use a piece of tape to secure the new leg in place. Make sure the tape is flush with the tray and the new leg. You can use a small piece of double-sided tape or masking tape for this.

Step 6: Re-insert the paper tray

Once the new leg is secured in place, re-insert the paper tray back into the printer. Make sure the paper tray inserts smoothly and closes properly.

By following these simple steps, you can repair your printer's tray leg and fix the tray open error. You can avoid this issue in the future by being gentle when inserting and removing the paper tray from the printer.

In conclusion, the HP OfficeJet 5255 tray open error can be frustrating, but it's not an unsolvable issue.