How Can I Add Ink to "non-Refillable" Stamps - such as PLUS Privacy ID Guard Roller Stamps
- By BCH Technologies
- On Jul 18, 2018
- Comment 0
This tutorial is to refill the "non-refillable" roller stamps made by "PLUS Guard Your ID". It is not for a refillable roller stamp which has.a refill hole in the middle of the roller.
The Plus Stamp non-refillable has a removable cartridge. The cartridge is not refillable and will cost $8. If you cut the stamp core open. You can see there is a sponge cylinder. A layer of rubber covers the sponge.
Product Used:
Oil Based Stamp Refill Ink 30 ml
Steps
- Removed the roller's cover by prying with a knife
- There are two methods. First, the rod comes off in two pieces. You can pull out the part with a more extended rod, and fill in space with ink and leave it for 24- hours.
- You can also use a rotary tool to drill two holes through the sponge. Then fill it up with ink, using the precision tip. By this way, you can use the roller stamp right away. It will take about 3-6 hours for the ink to spread evenly.