Brother Cartridge Refilling: From Non-Chipped to Chipped Models

Refilling Non-Chipped Brother DCP-197C Cartridges

The Brother DCP-197C printer uses cartridges without chips. Refilling such cartridges is indeed feasible and can be a cost-effective solution for users. The absence of a chip simplifies the refilling process, as there's no need to deal with chip compatibility or resetting issues.

To refill non-chipped Brother DCP-197C cartridges:

1. Gather necessary supplies: You'll need ink refill kits compatible with Brother DCP-197C cartridges, syringes, gloves, and paper towels.
2. Prepare the workspace: Work on a clean, flat surface covered with paper towels to avoid any spills or stains.
3. Extract the cartridge: Remove the empty cartridge from your printer carefully.
4. Locate refill holes: Identify the refill holes on the cartridge. These are usually found under labels or rubber plugs.
5. Refill the cartridge: Use the syringe to inject the appropriate ink color into the corresponding chamber of the cartridge. Take care not to overfill.
6. Seal the refill holes: Once filled, seal the refill holes securely with the provided plugs or adhesive tape.
7. Reinstall the cartridge: Place the refilled cartridge back into the printer, ensuring it is properly seated.
8. Test the print quality: Print a test page to check if the refilled cartridge is functioning correctly.

Refilling Chipped Original Cartridges of DCP-J132W

Refilling chipped original cartridges, such as those used in the Brother DCP-J132W printer, requires additional considerations due to the presence of the chip. However, it is still possible with the right approach.

While some users transfer chips from original cartridges to non-original ones for compatibility, refilling the original cartridges themselves can be a bit more intricate. The challenge lies in resetting or reprogramming the chip to recognize the refilled ink levels accurately.

Here's a general guide for refilling chipped original cartridges of DCP-J132W:

1. Obtain a compatible refill kit: Look for refill kits specifically designed for Brother DCP-J132W cartridges. These kits often come with tools and instructions for chip resetting.
2. Reset the chip: Follow the instructions provided with the refill kit to reset the chip on the original cartridge. This step is crucial to ensure proper ink level detection by the printer.
3. Refill the cartridge: Proceed with refilling the cartridge using the same steps outlined for non-chipped cartridges.
4. Test and troubleshoot: After refilling and reinstalling the cartridge, print a test page to verify the print quality and ink level detection. If any issues arise, consult the refill kit instructions for troubleshooting tips.

Refilling original Brother cartridges, whether non-chipped or chipped, offers a cost-effective alternative to purchasing new cartridges. However, it's essential to follow proper procedures and use compatible refill kits to ensure optimal performance and print quality.

Remember to exercise caution and follow instructions carefully to avoid damaging your printer or cartridges. If you're uncertain about the refilling process, consider seeking assistance from professional printer technicians or reliable online resources.

For more tech tips, tutorials, and printer-related content, subscribe to our YouTube channel at https://youtube.com/@bchtechnologies and follow our tech blog. If you're in the Greensboro, North Carolina area, visit us locally for expert assistance with all your printing needs.