Roll over image to zoom in
Lime Color Re-Entry Stamp Ink by BCH for Event Admittance - Skin-Safe with Aloe Vera Extract - 3 oz Lime
Designed for the stamp on the skin for Festivals, Parties, Pubs, Special Events, and Exhibitions. There are thousands of prints per bottle. CRISP AND CLEAR PRINTS. Trusted quality from BCH...
$9.99
Designed for the stamp on the skin for Festivals, Parties, Pubs, Special Events, and Exhibitions.
There are thousands of prints per bottle. CRISP AND CLEAR PRINTS. Trusted quality from BCH
Durable and Washes Off Nicely. Sweat-proof, Weather-Proof, and Water Resistant. The ink fades under direct running water, soap, and a scrub. However, a deliberate scrubbing will be needed for 100% removal. Therefore, it cannot be claimed that the stamp is gone by sweating, rain, or an unintentional wash. Under normal conditions, the stamp will be gone from the skin in 12-18 hours.
Fast Drying and Anti-Smudge: We care about your cloth. Once applied to the skin, it will dry in less than 20 seconds without ventilation and even faster in the natural environment. The ink does not dry as fast as solvent inks but can be re-moistened using water instead of an expensive thinner (as is typically used on solvent ink).
Skin Safe: Your skin is safe with BCH. We don't want any chemical solvent to be near any customer's skin. This ink is water-based, non-toxic, waterproof, low odor, fade-resistant, and environmentally friendly. We have even added Aloe Vera extract to our formula.
Water-based ink can be used with regular foam ink pads, felt pads, or self-inking stamps. This ink is for self-inking stamps only. Please do not use it with a pre-inked oil-based stamp. Any regular self-inking stamp will work.
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
Best thing ever!! i used to put cleaning solution in the capping station with a syringe/hose then had to suck out f the wast line with a syringe.... over and over until the capping station was clean. maybe up to 10 times. now i just use maybe 1 or 2 - 30ml syringes full of water and the pump cleans it out so good.... then I put capping solution, place printhead over capping station and turn on the back of the machine. thats it. when i print again, usually next day, I pull from waste tank a few times until I get ink, then i run 1 head cleaning , print a test strip and usually good to go. I sometimes print a 2nd test strip. SO MUCH easier to use this little pump. so glad I bought it.
RUTH FIGUEROA
TMS Printhead Maintenance System by BCH: Comprehensive Cleaning and Maintenance Solution
This is a must have modification to save time troubleshooting. You will need to download Kevin's capping station video to disassemble the capping station. A definite must. You will also need a few other connections to hook this up. All parts are linked in his videos. Pro tip. Have patience and go slow. This modification will save you from a lot of headaches . I did this mod on Procolored L1800 about a year old . Thanks Kevin.
Vincent Kretlow
Waste Ink Collection Tank Combo with Small Tube for Epson (AS-EP-WASTE-25MM)
I purchased this product and messed it up first time. I somehow got superglue onto the main circuit board on the colour cartridge and for some reason (not sure how) I messed up the black one too. I repurchased the product (x2). I tried again with the colour one first (which is meant to be the most difficult). I was careful to wrap the circuit board and print head in cling film and taped it down on top. I was careful with the superglue and let it dry upside down for 24 hours so that if the glue leaked anywhere it wouldn't go towards the circuit board. It works great. I now have a functioning refillable colour cartridge. I am glad I got the hardest one out of the way first. I will shortly try the black one. But fantastic that overall, I know this product will save me a fortune in printing now. The colour one is obviously the hardest and it works! Good job guys. (I am from the UK which is why we spell colour with a u lol).
Daniel Cunningham
Modification Kit for Making Spongeless Cartridge with Canon PG-210 CL-211 PG-240 CL-241 PG-245 CL-246 PG-243 CL-244 PG-260 CL-261 PG-275 CL-276