Roll over image to zoom in
7-pin Carriage CR Encoder & PW Sensor FFC Cable for Epson EcoTank ET-2750
Sensor FFC Cable for Epson Printers Compatible with Epson ET-2750 and ET-2760. This cable may also work with other EcoTank printers that share the same pin configuration and length. However,...
$7.99
SKU:
PPO-EP-FFC-ST2K-7x1
Categories:
Tags:
Sensor FFC Cable for Epson Printers
Compatible with Epson ET-2750 and ET-2760. This cable may also work with other EcoTank printers that share the same pin configuration and length. However, the folding pattern might differ, and you may need to adjust it accordingly. Each cable is designed to withstand over 20 folds at 180 degrees.
Specifications:
- Pins: 7-pin (4-pin + 3-pin)
- Length: 390 mm (approximately 15.3 inches)
- Folding: Originally sourced from ET-2750 or ST-2000 models
Cable Connections:
There are two cables that connect to the printhead carriage:
-
Printhead Cable (Not Included):
- A wide 20-pin cable that connects directly to the printhead at the printhead carriage.
- It splits into two 10-pin sections and later merges again to connect to CN301 on the mainboard.
-
Sensor Cable (This Product):
- A slimmer 7-pin cable (4-pin + 3-pin).
- Starts at CN303 on the mainboard (see diagram below).
- Splits into two sections at the printhead carriage:
- 4-pin section – Connects to the CR Encoder at the back of the carriage.
- 3-pin section – Routes underneath the carriage to the PW Sensor.
Important Note:
Some printers may only use a 4-pin cable, omitting the PW sensor. If your printer falls into this category, you can either purchase our 4-pin cable or trim this 7-pin cable with scissors to create the necessary split.
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
34%
Best place for parts and accessories I ordered this print head carriage after watching a few bch videos wanted to fix and upgrade my cr encoder sensor while i was at it and i was not let down censor is original and whole assembly is new and never been used could not be happier thank you thanks Kevin!!
Josie Franco
New Genuine L1800 Printhead Carriage Return (CR) Unit
Great products for maintaining a dtf machine. The filters are too small for my xp600 machine All the products are good, some are too small for my needs but that's my fault. Filters are too small for my A1 dtf machine. I can still use the syringes but I really needed larger capacity to be efficient maintaining my commercial machine. Quick shipping, products are always quality and packaged very well. I've learned so much from all of the videos. Thank you!
Shelley J Fenner
18 PCS Deluxe CISS CIS Tool Bundle: 6 Syringe+6 Long Needle +6 Air Filter
Huge money and time saver!! I've been refilling my cartridges for a long time, but with my daughter becoming a teacher, printing has grown exponentially. After lots of research and pondering options, I decided to go with the Spongeless kit. I watched the YouTube videos several times before doing the conversion. It's not an easy process and requires patience, but it was the best decision ever! After the conversion, we were able to print about 300 pages without any issues, and the refilling process was super easy. Highly recommended if you have the patience and skills.
Julio Martinez
Modification Kit for Making Spongeless Cartridge with HP Integrated Cartridges 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 74, 75, 901(AS-RFC-HPSQ803-LEFT)