Roll over image to zoom in
NO RETURN REMAN HP 934 935 Printhead for HP OfficeJet Pro 6230 6830 6815 6812 6835 Print Head
DO NOT BUY if you don't know how to refill your printer. Most printheads needs more than half a tank of cartridge to prime. We have many people only done...
$25.99
DO NOT BUY if you don't know how to refill your printer. Most printheads needs more than half a tank of cartridge to prime. We have many people only done 2-3 cleanings then contact us, or run 5 cleanings without refilling cartridges. Therefore, we make this product NOT RETURNABLE. You buy it, you own it. It is SOLD AS IS. DO NOT BUY if you don't know how to refill and clean your printer.
Refurbished Printhead for HP with 934 or 935 XL/non-XL Printer Cartridges
If your printer uses these cartridges, then you are in the right place.
FRESH & WET!
Refurbished fresh in the USA. We've been in business for 10 years. The key to success is to keep the printhead FRESH. You order TODAY, we will refurbish it TOMORROW. So there will be a minimum of a two-day fulfillment time. Once we have a 100% nozzle check, we will pack the printhead in a moisture-sealed package and ship it to you immediately. The package will be shipped with USPS first-class mail and takes 3-5 days (up to 14 days with current USPS slowdown).
Once you receive it, install it immediately or within 24 hours. The installation video can be found on YouTube (Watch code: m13fPCV7qVQ). The printhead is filled with wetter solution, so the first few prints will be blank. We suggest running up to six printhead cleanings on the first day, sit the printhead overnight, then run six more cleanings the second day. Of course, if any of the cleanings produce a good nozzle check, stop the cleaning. If the printhead is still not working after a total of 12 cleanings, contact us.
To minimize nozzle drying, this product is shipped WET. You need to install and test within 48 hours upon receiving them.
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
Best thing ever!! i used to put cleaning solution in the capping station with a syringe/hose then had to suck out f the wast line with a syringe.... over and over until the capping station was clean. maybe up to 10 times. now i just use maybe 1 or 2 - 30ml syringes full of water and the pump cleans it out so good.... then I put capping solution, place printhead over capping station and turn on the back of the machine. thats it. when i print again, usually next day, I pull from waste tank a few times until I get ink, then i run 1 head cleaning , print a test strip and usually good to go. I sometimes print a 2nd test strip. SO MUCH easier to use this little pump. so glad I bought it.
RUTH FIGUEROA
TMS Printhead Maintenance System by BCH: Comprehensive Cleaning and Maintenance Solution
This is a must have modification to save time troubleshooting. You will need to download Kevin's capping station video to disassemble the capping station. A definite must. You will also need a few other connections to hook this up. All parts are linked in his videos. Pro tip. Have patience and go slow. This modification will save you from a lot of headaches . I did this mod on Procolored L1800 about a year old . Thanks Kevin.
Vincent Kretlow
Waste Ink Collection Tank Combo with Small Tube for Epson (AS-EP-WASTE-25MM)
I purchased this product and messed it up first time. I somehow got superglue onto the main circuit board on the colour cartridge and for some reason (not sure how) I messed up the black one too. I repurchased the product (x2). I tried again with the colour one first (which is meant to be the most difficult). I was careful to wrap the circuit board and print head in cling film and taped it down on top. I was careful with the superglue and let it dry upside down for 24 hours so that if the glue leaked anywhere it wouldn't go towards the circuit board. It works great. I now have a functioning refillable colour cartridge. I am glad I got the hardest one out of the way first. I will shortly try the black one. But fantastic that overall, I know this product will save me a fortune in printing now. The colour one is obviously the hardest and it works! Good job guys. (I am from the UK which is why we spell colour with a u lol).
Daniel Cunningham
Modification Kit for Making Spongeless Cartridge with Canon PG-210 CL-211 PG-240 CL-241 PG-245 CL-246 PG-243 CL-244 PG-260 CL-261 PG-275 CL-276