Roll over image to zoom in
Chip Resetter for Epson Cartridges T1xx Series: T124, T125, T126, T127,T128, T129, T130, T133, T140, T5846, and T5852 (AS-RESET-EP1)
Works with T1xx SeriesThis resetter does NOT work with: Starter cartridges: The first set of cartridges which comes with a new printer Third-Party ARC chips Cartridges with low ink (<15%). If a...
$25.99
Works with T1xx Series
This resetter does NOT work with:
- Starter cartridges: The first set of cartridges which comes with a new printer
- Third-Party ARC chips
- Cartridges with low ink (<15%).
- If a cartridge has an X sign on the LCD screen, it is passed the reset point.
- If a cartridge has a triangle sign, it is between 10-15%, your chance varies.
- Even if it doesn't have an X or triangle sign, some cartridge still won't be able to reset if the ink level is too low.
The resetter works with:
- OEM cartridges with plenty of ink
- Third-party one-time-use cartridges with plenty of ink
An Epson cartridge has a memory chip that records the number of printed pages. The printer uses the page count estimating the ink level. Therefore, a refilled cartridge won't show a correct ink level because the chip remembers the old page-count When a cartridge prints too many pages, the printer will refuse to print, no matter how much ink is left.
This chip resetter resets the page number to zero, so we can use a refilled cartridge.
When a printer shows low ink, we will take out the cartridge and add more ink. Then, we will put it on the resetter and press the cartridge down for a few seconds. A green LED light will indicate that the page number has been reset.
We need to reset (and refill) a cartridge when it has at least 15% of its ink left.
The resetter works on Epson original cartridges and most of the third party compatible cartridges. Because we can't test all the cartridges from the third party manufacturers, we only say the resetter works with all of the tested ones.
The resetter only works with these cartridge models:
T124, T125, T126, T127, T128, T129, T130, T133, T140, T5846, and T5852
T124
T124120 T124220 T124320 T124420
- Stylus and Small all-in-one
- NX125
- NX127
- NX130
- NX230
- NX430
- WorkForce
- 320
- 323
- 325
- 435
T125
T125120-S T125220 T125320 T125420
- Stylus
- NX125
- NX127
- NX130
- NX230
- NX420
- NX530
- NX625
- WorkForce
- 320
- 323
- 325
- 520
T126
T126120-BCS T126120 T126220 T126320 T126420
- Stylus
- NX330
- NX430
- WorkForce
- 60
- 520
- 630
- 633
- 635
- 645
- 545
- 840
- 845
- WF-3520
- WF-3540
- WF-7010
- WF-7510
- WF-7520
T127
T127120-D2 T127120 T127220 T127320 T127420
- Stylus
- NX530
- NX625
- WorkForce
- 60
- 545
- 630
- 633
- 635
- 645
- 840
- 845
- WF-3520
- WF-3540
- WF-7010
- WF-7510
- WF-7520
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
I have an old Epson ET-2750 eco tank printer, which I have used for years, and since it is uses refillable ink tanks, have used very little ink over the years. I love this printer because I can print lots and lots of pages, including double-sided at very low cost, and it is very reliable. I recently had a paper jam, which is very unusual. When I took off the back panel to clear the jam, I accidentally dropped it on the floor, and when I replaced the back panel, the printer jammed every time I tried to print double-sided. I found a small plastic piece on the floor that fit on one end of the roller, but didn't realize I was missing the other end. I eventually noticed that there was a gear on the back panel next to where the roller fits into the panel. I deduced that I must be missing a gear to pop into the end of the roller, to mesh with the gear on the panel. I couldn't find the missing gear anywhere, and figured my cats must have lost it or my wife might have swept it up when sweeping the floor, and discarded it. Through a Google search, I found BCH Technologies, ordered the part from them, it fit perfectly, and now I can print double-sided again on my faithful old Epson printer. I very much appreciated being able to get the missing part from them. I thought the price for the part and shipping was high for such a small part, but that was the only down side.
Daniel Parker
Duplex Roller Feed Gear for Epson Printers
Best place for parts and accessories I ordered this print head carriage after watching a few bch videos wanted to fix and upgrade my cr encoder sensor while i was at it and i was not let down censor is original and whole assembly is new and never been used could not be happier thank you thanks Kevin!!
Josie Franco
New Genuine L1800 Printhead Carriage Return (CR) Unit
As always, great quality products, quick delivery and customer support that is top notch.
Shelley J Fenner
12V Peristaltic Pump for DTF/DTG Printers - White Ink Management System