Fixing a Broken Printhead Carriage Screw Hole on Epson L1800, L800, L805, 1390, and 1430 DTF Printers

Question:
While cleaning my printer, I noticed that the top right side of the printhead carriage, where the screw goes, has broken off. I'm considering using your DTF Printhead Carriage Return Screw Hole Repair Kit. Will this repair kit effectively fix my problem, allowing me to reinsert the screw securely? Or would I need to buy an entirely new carriage? Additionally, should I remove the new printhead I recently installed until I have fixed this issue? I've placed distilled water on top of the capping station before turning the printer off.

Answer:

The DTF Printhead Carriage Return Screw Hole Repair—Complete Screwhole Kit is designed specifically to address the kind of damage you've described. The kit includes a special rubber dam to securely hold epoxy resin and a precisely sized rubber screw matching Epson's specifications, helping you form a new screw hole exactly where the original one was stripped or broken.

However, without directly inspecting your printer, it's challenging to guarantee the kit's effectiveness in your specific case. Generally, if only the screw hole or surrounding plastic has been compromised, the kit will effectively restore the structural integrity needed to re-secure the printhead carriage screw.

To complete this repair:

• Prepare for Repair: You must carefully remove the printhead and store it safely to avoid further damage during curing.

• Applying the Kit: Follow the instructional video provided on the product's page, demonstrating exactly how to set the rubber dam and epoxy resin. Properly following these steps is crucial for a successful repair.

• Epoxy Curing Time: Allow 12 to 24 hours for the epoxy resin to fully cure and harden, creating a reliable new hole that will securely accommodate your original screw.

• Post-Repair Steps: After the epoxy has cured fully, carefully reinstall the printhead carriage screw and the printhead itself. Ensure all components fit securely and align properly before restarting your printer.

Regarding your question about removing the printhead, It is highly advisable to remove your new printhead and store it appropriately during this repair period. Leaving the printhead installed could risk damage from curing epoxy residue or accidental misalignment during repair.

Additionally, you've mentioned placing distilled water on the capping station, which is a suitable practice to prevent printhead drying while the printer is off. Continue doing so while the printhead is removed to maintain moisture and prevent ink from drying and clogging.

Addressing printer issues can indeed be intricate, given their hands-on nature. Therefore, we can't provide remote troubleshooting or direct repair guidance. BCH Technologies does offer in-person evaluation and repair services, operating on a first-come, first-served basis due to high demand. The wait time might be a few weeks, but our services are comprehensive, covering both full printer repairs and targeted parts replacement, with clear guidance provided.

While our repair services might not be the most economical option, we strongly encourage exploring online self-help resources. You can start by searching our extensive video library on our YouTube channel homepage. Utilize the search function next to "About" in the top menu bar to find relevant tutorials efficiently. Given our vast collection of printer repair content developed over the past nine years, this method will provide you with the most precise and helpful information. Additionally, YouTube may suggest useful related videos from other channels.

Thank you again for your patience, understanding, and continued support. We wish you the best in repairing your printer effectively!