How to Reset and Replace the Waste Ink Pad on an Epson ET-2760 Printer

Owning an Epson ET-2760 printer can be a great convenience, but encountering a waste ink pad error can quickly disrupt your printing workflow. Fortunately, resolving this issue is straightforward with the right approach and a few key tools. In this blog post, we’ll guide you through diagnosing the problem, replacing the waste ink pad, and resetting the printer’s waste ink counter.

Identifying the Waste Ink Pad Issue

The waste ink pad is an essential component of Epson printers, responsible for absorbing excess ink during cleaning cycles. Over time, this pad becomes saturated, and the printer triggers an error message. The most common indicators are:

• Error 202.604: The printer does not initialize properly.

• Service Required: The printer displays a message indicating that the waste ink pad needs maintenance.

When you encounter these errors, the first step is to inspect the waste ink tank at the back of your printer. Remove the cover by unscrewing the designated screws. You may find that the waste ink tank is completely full, signaling the need for a replacement.

Replacing the Waste Ink Pad

Instead of purchasing a new waste tank, which can be costly, BCH Technologies offers a reusable waste ink diversion kit. This kit includes:

• A waste ink bottle

• A vacuum patch

• A connector for diverting the ink

The bottle is designed to sit securely next to your printer, while the vacuum patch helps keep it stable. Unlike a traditional waste tank, this system is reusable, making it both eco-friendly and cost-effective. Simply connect the tube to the printer, and future waste ink will be diverted to the external bottle rather than saturating the internal pad.

Resetting the Waste Ink Counter

After physically replacing or diverting the waste ink, the next crucial step is resetting the printer’s waste ink counter. This counter tracks how much ink has been absorbed by the pad and must be cleared to restore normal printer function.

To reset the counter, follow these steps:

1. Go to InkChip.net and select the WIC (Waste Ink Counter) reset tool.

2. Download the software and follow the prompts to install it.

3. Connect your printer via USB, as Wi-Fi connections may not be recognized.

4. Once installed, open the program and select your printer from the list. If your printer is not listed, ensure the correct driver is installed by downloading it from the official Epson website.

Important Safety Tips

When downloading software, always use official sources. Some websites mimicking Epson’s domain may contain malware or fake drivers. Make sure you visit the actual Epson support page to avoid potential security risks.

Purchasing and Using the Reset Key

Once you have confirmed that your printer is detected by the software, you can purchase a reset key from InkChip.net. These keys are affordable, typically under $10, and discounts are available for bulk purchases. After purchasing, you will receive the key within seconds. Enter the key into the software, click Reset, and restart your printer.

Verifying the Reset

After resetting, it’s essential to check the waste ink counter to ensure it is back to zero. You can do this by selecting the Read Ink Counter option within the software. The software will display the updated counter status, confirming that your printer is ready for use again.

Final Thoughts

Resetting the waste ink pad on your Epson ET-2760 doesn’t have to be a daunting task. By utilizing the BCH Technologies waste ink diversion kit and the WIC reset tool, you can save money and extend the life of your printer. Plus, with a reusable waste ink system, you’re also making an eco-conscious choice.

For a step-by-step visual guide, we have a video below to show you how it’s done. Check it out to see the entire process in action!