Replacing a Damaged Cable on an Epson WF-7610 Printer

Question: I replaced the printhead on an Epson WF-7610 by following some video and damaged the cable when reconnecting the contact board. Which cable do I need to order as a replacement?
 
Answer: Thank you for reaching out to us with your question! First, we apologize for not being able to respond sooner. We understand that printer issues can be urgent and frustrating, and we want to address your concern thoroughly. At BCH Technologies, we greatly appreciate your engagement and support, especially on our YouTube channel [https://youtube.com/@bchtechnologies]. Your feedback helps us continuously improve our technical knowledge and resources.
 
To answer your question, if you think the cable was damaged while replacing the printhead, you can find the appropriate cable for your Epson WF-7610 on BCH Technologies. Using the correct cable is essential; our Printhead FFC Bundle Combo includes the cable you need and is compatible with Epson Workforce models WF-7210, WF-7218, WF-7610, WF-7620, WF-7621, WF-7710, WF-7720. Source: BCH Printhead FFC Bundle Combo Link Example [https://bchtechnologies.com/products/printhead-ffc-bundle-combo-for-epson-workforce-wf-7210-wf-7218-wf-7610-wf-7620-wf-7621-wf-7710-wf-7720?_pos=1&_sid=2eaaad714&_ss=r]
 
Tips for Installation:
Check the Connector: Inspect the connector on the printhead and the motherboard for visible damage or debris before connecting a new cable. If required, gently clean the contacts.
Handle with Care: When putting the cable back in, be careful not to fold it too much; otherwise, the internal structure within the cable might be damaged.
Review the Video Tutorial: If you have used a tutorial before, refer back to it to ensure you take the proper steps. Content on our YouTube channel might also help you.
 
Printer issues can be a tricky business because many of the problems are hands-on. Unfortunately, we cannot offer remote troubleshooting, solutions, or assistance with printer repairs. Our local diagnostic facility offers an in-person evaluation and repair service (BCH Printer Repair Service [https://bchtechnologies.com/printer-repair-service]). Still, due to high demand, we need to operate on a first-come, first-served basis, which can mean waiting a couple of weeks to schedule your printer for the drop-off.
We have planned our services so that a complete printer or specific parts are systematically repaired and guided. Still, we realize our rates may not be the cheapest. Therefore, we strongly encourage you to look for self-help methods by searching online. First, access our YouTube channel homepage at [https://youtube.com/@bchtechnologies], click on the search in the menu bar (next to “About”), and type keywords. YouTube’s recommendations might also surface relevant videos from other creators to help you.
We hope this helps! Thanks again for contacting us and for your support of BCH Technologies. If you have any questions, don't hesitate to get in touch, and check out our YouTube channel for more!