Epson ET-8550 Printers: Should You Do Printhead Nipple Conversion?

Question:
I want to convert my Epson ET-8550 printer to a cup conversion using a nipple conversion kit. Is this change highly recommended for someone with little experience in such DIY printer projects?
 
Answer:
Thanks for contacting us. I'm sorry your experience here has been upsetting. We are sorry for the late response to your question. Printer problems and changes can often be critical, and we at BCH Technologies take pride in offering detailed and considered advice. Thank you also for watching us, interacting with us, and supporting us through our YouTube channel (https://youtube.com/@bchtechnologies). This helps us continue to adjust our approach, which is how we improved the content we were considered experts on.
 
Epson ET-8550 Printhead Nipple Conversion (PNC) Process.
 
This Printhead Nipple Conversion Kit will allow you to remove the pre-fitted mesh intake on the Epson ET-8550 printhead and replace it with a nipple-based system. This upgrade offers several key benefits:
Enhanced Ink Flow: The nipple system allows for better ink transfer, minimizing the chance of blockages.
Sealing: The open design of the mesh intake is much more prone to leaking due to its design, plastering ink on sensitive and dry areas on the inside of your machine, especially with white ink, while the nipple-style system seals the inside of your machine much better.
Easy Maintenance: This system, when combined with the V-2 Top Load White Ink Dampers, promotes optimal ink flow and requires less maintenance.
Is This Do It Yourself Project a Good Fit for You?
This kit offers many benefits, but it is aimed at experienced printhead converters. It requires a very specific installation, so you better know your way around printer internals.
Suppose you are asking this question after reviewing the product description and viewing our tutorials, but you may lack the technical knowledge or confidence to perform the job successfully. In that case, the answer might be that you should use a professional. That’s all right — it’s better to honestly evaluate your readiness before attempting such a tricky procedure.
What You Can Do:
Inspect the Product and Instructions:

• Then start by reading the entire product description for the Printhead Nipple Conversion Kit (https://bchtechnologies.com/products/pnc-printhead-nipple-conversion-kit-for-epson-et-8550).
• Understanding every single step of the process through our detailed YouTube tutorials (https://youtube.com/@bchtechnologies)

Assess Your Comfort Level:

• If you are unsure how to convert, look for an experienced person or a professional service to do it for you.

Rest on Flash Tools (Not Mandatory):

• If you have a less critical printer, you can practice that first and gain confidence before proceeding with the conversion on the Epson ET-8550.

Additional Note:
Most printers have tangible aspects to their modification or repair, making the analysis expensive. Regrettably, we can not support or assist with remote troubleshooting for these projects. However, based on availability and demand, you can ship your printer to be evaluated and repaired at our local diagnostic facility (https://bchtechnologies.com/printer-repair-service). Services are on a first-come, first-served basis, and wait times may apply.
We encourage you to check out our YouTube channel (https://youtube.com/@bchtechnologies) for tutorials and guides. You can also search the individual channels themselves (use the search icon next to “About” on the channel). The tool can also introduce you to similar content from different creators, which can also give you a new perspective on the subject.
Thank you for contacting us again. Thank you for your faith in BCH Technologies. We hope this information supports your decision regarding Printhead Nipple Conversion. If you have more questions, just let us know!