How to Replace and Reset Waste Ink Pad on Epson Printers: A Complete Guide
- By Jee Comendador
- On Apr 12, 2023
- Comment 0
If you own an Epson printer, you may have encountered the dreaded "waste ink pad full" error message. This error occurs when the printer's waste ink pad, which collects excess ink during cleaning and maintenance, reaches its maximum capacity. When this happens, the printer stops working until the waste ink pad is replaced or reset.
Replacing the waste ink pad on an Epson printer can be a daunting task, but it's essential to keep your printer functioning properly. In this article, we'll guide you through the process of replacing and resetting the waste ink pad on your Epson printer, step-by-step.
Before we get started, it's important to note that replacing the waste ink pad on an Epson printer can be messy, and it may void your printer's warranty. If your printer is still under warranty, we recommend contacting Epson customer support for assistance.
Step 1: Check Your Printer's Waste Ink Pad
The first step in replacing the waste ink pad on your Epson printer is to locate the pad itself. Depending on your printer model, the waste ink pad may be located in different areas of the printer. To find the waste ink pad, refer to your printer's user manual or search online for instructions specific to your printer model.
Once you've located the waste ink pad, check its condition. If the pad is heavily saturated with ink or is disintegrating, it's time to replace it. If the pad is only partially full, you may be able to reset the waste ink counter instead.
Step 2: Clean the Waste Pad
Before replacing the waste ink pad, it's essential to clean the area around the pad to avoid ink spills and ensure a clean work environment. Use a damp cloth or paper towel to wipe away any excess ink, and be sure to wear gloves to protect your hands.
Step 3: Replace the Waste Ink Pad
To replace the waste ink pad on your Epson printer, you'll need to disassemble the printer and remove the old pad. Again, the process will vary depending on your printer model, so be sure to refer to your user manual or search online for instructions specific to your printer.
Once you've removed the old waste ink pad, clean the area around the pad with a damp cloth or paper towel. Then, install the new waste ink pad and reassemble the printer.
Step 4: Reset the Waste Ink Counter
After replacing the waste ink pad, you'll need to reset the waste ink counter to clear the "waste ink pad full" error message. To do this, you'll need to enter your printer's service mode and run a waste ink pad counter reset utility.
Again, the process of resetting the waste ink counter will vary depending on your printer model, so be sure to refer to your user manual or search online for instructions specific to your printer.