How to Remove the Cover of Epson WorkForce Pro WF-6090: A Step-by-Step Guide

If you own an Epson WorkForce Pro WF-6090 printer, you know how important it is to keep it in good working condition. But what do you do when you need to access the internal components for maintenance or troubleshooting? Removing the cover of your printer can seem intimidating, but with the right instructions, it can be a simple task. In this article, we’ll show you how to take off the cover of your Epson WF-6090 printer in a few easy steps.

Step 1: Prepare Your Printer

Before you begin, turn your printer towards the back so you can access the screws. Locate and remove the four screws on the back paper guard. Lift the back paper guard, and you'll see two screws on top. Remove those two screws to take off the top cover easily.

Step 2: Remove the Screws

Next, turn your printer to the front and locate the five screws on top of the printer cover. There are three screws in the front and two in the middle. Unscrew them using a screwdriver. After that, use a screwdriver to pry from the left, and you'll find six more screws. Remove all these screws, counting them carefully to ensure you don't miss any.

Step 3: Take Off the Front LCD

Now you can take off the front LCD. Locate the five screws and remove them. Once you remove the screws, the front panel can be taken off. Remove the two more screws on the right panel, and then take it off. Pull the wire out of the socket and unwind it. This part is the mechanical sensor that senses whether the door is closed or not.

Step 4: Lift the Cover

Locate the two screws on the front before you remove the cover. Start from that corner and lift it up. Your goal is to lift the cover up, not forward. When you lift it up, it's going to slide forward. Lift up, lift up, lift up. You will reach the bottom, and you'll see a little spot to put your screwdriver in to take it out.

Step 5: Remove the Case

Now it's time to remove the case. The key is in the back, so turn the printer to the back. Start from the front, work all the way to the back, and put your finger there to hold the position. Pry it right there, and now every component is exposed inside, and you can do your own thing.

In conclusion, removing the cover of your Epson WorkForce Pro WF-6090 printer may seem daunting, but it’s a simple process if you follow the steps correctly. Make sure you count the screws carefully and keep track of each one you remove. If you encounter any issues, visit bchtechnologies.com for additional support. Now that you know how to take off the cover of your printer, you can maintain and troubleshoot it with ease.