How to Fix the HP Printer Cover Open Error: A Step-by-Step Guide
- By Jee Comendador
- On Apr 17, 2023
- Comment 0
If you own an HP printer, you might have encountered an error message that says "HP Door Open" or "Printer Cover Open." This error can be frustrating, as it prevents you from printing any documents until you fix it. In this article, we will guide you on how to fix the HP Printer Cover Open error on various HP printer models.
Before we proceed with the steps, make sure to watch the video below for a visual guide on how to fix the HP Printer Cover Open error.
To fix the HP Printer Cover Open error, you will need to remove and replace the display panel, display panel assembly, and display panel cable. The process may vary depending on your HP printer model, so we will provide a general guide that you can follow.
Step 1: Turn off your HP printer and unplug it from the power source.
Step 2: Locate the display panel on your HP printer. For some models, you may need to lift the scanner lid to access it.
Step 3: To remove the display panel, look for the latch on the right side of the panel and press it. Then, gently lift the panel to remove it.
Step 4: If you need to replace the display panel, simply disconnect the cable that connects it to the printer and connect the new one.
Step 5: If you need to replace the display panel assembly, remove the screws that hold it in place and disconnect the cable. Then, connect the new assembly and screw it back in place.
Step 6: If you need to replace the display panel cable, disconnect it from both the display panel and the printer, and connect the new one.
Step 7: Once you have replaced the necessary components, put the display panel back in place and press it down until you hear a click. Make sure it is securely in place.
Step 8: Plug your HP printer back in and turn it on. The HP Printer Cover Open error should be resolved.
If you own an HP OfficeJet 7612, 7510, 8022, 8018, 8010, 8020, 8025, or HP 3035, you may encounter the HP Printer Cover Open error. These printer models have a similar process for fixing the error, but with slight differences.