Damper Replacement for Your ET-15000 Printer

Maintaining a printer requires understanding its various components, one of which includes the damper. For those looking to replace the dampers in their ET-15000 printers, this detailed guide provided by BCH Technologies walks you through each step of the process. Follow along to ensure your printer continues to operate smoothly.

Removing the Top Panel and Carriage Cover

Begin the damper replacement by carefully removing the top panel of your ET-15000. Locate the four screws that secure the panel and unscrew them. With the screws removed, the top panel should come off easily. Pay attention to the spring on the latch mechanism; note its placement so you can reattach it correctly later. After this, proceed to remove the carriage cover by lifting the tab and sliding the cover out, giving you full access to the internal components.

Extracting the Tube Guard

Once the carriage cover is removed, your next step is to slide out the tube guard. This part shields the ink delivery tubes and is secured with a screw on one side and tabs on the other. Remove the screw, then gently lift the tabs on either side to free the tube guard. This will expose more of the internal workings of the printer, necessary for the next steps.

Damper Removal Process

With the internal components exposed, focus on the dampers themselves. Each damper is held in place by a tab. Press on these tabs one by one to release each damper from the carriage. Carefully lift out each damper, ensuring not to damage any other parts of the printer’s delicate internal mechanism.

Sourcing Replacement Dampers

When looking for replacement dampers, it's crucial to choose high-quality components that are compatible with your ET-15000. BCH Technologies recommends using genuine OEM (Original Equipment Manufacturer) dampers to guarantee compatibility and performance. These can be found directly on their website, ensuring you get the exact parts needed for your printer model.

Installation Tips for New Dampers

Upon acquiring the appropriate dampers, prepare to install them by aligning each one with the grooves on the back of the carriage. It is essential that the shape of the notch on the damper matches these grooves for a secure fit. If you opt for non-OEM or third-party dampers, you might need to make modifications. This could involve marking and cutting the plastic to fit the carriage, a task that should be done with precision to avoid any damage or misalignment.

Ensuring Smooth Operation

Once the new dampers are installed, reassemble your printer by following the disassembly steps in reverse order. Ensure all parts are securely fastened and the printer is set up correctly. Before starting your printer, it’s a good idea to run a test to check that everything is working as it should. This helps in avoiding any print quality issues or further mechanical problems.

For additional guidance, BCH Technologies provides a video demonstration of the entire process below, making it even easier to follow along and ensure that each step is performed correctly. Visit our website for more information and support.