Canon TS6320 CIS Ink Tank System Quick Overview

In this quick video, I demonstrate how the Continuous Ink System (CIS) for Canon TS6320 works. You can view this video for a more detailed look at the installation. This will just be a quick run-down on how to do it.

Put the tubes underneath the printhead. You can put some double-sided tape on the bottom, and you will want to lubricate the top a little bit with some grease or something similar. I don’t want to give you a firm measurement for how long the tube will need to be, because it will be different according to your printer—you want to be sure you can reach both ends, so don’t cut it prematurely.

Here is how to split the black ink. You only get one black tank, so you need to break the black line into two new ones to feed both black cartridges. You can purchase splitters here through BCH Technologies. You will also need a small hand drill to drill the hole. The original OEM cartridge refill hole is slightly smaller, so it’s harder to put an elbow in.