When working with printers, encountering error codes can be frustrating. This article provides guidance for addressing the Canon MG3150 error code P07, commonly related to the ink absorber being full. Let's delve into the steps to resolve this issue, examine potential causes, and understand the use of Canon's Service Tool 3400.

Understanding Error P07

Error P07 typically indicates an issue with the ink absorber, which is designed to collect excess ink during cleaning cycles. Over time, the ink absorber can become saturated, leading to the P07 error.

Cleaning the Ink Absorber

A common approach to resolving the P07 error is cleaning or replacing the ink absorber. To clean the ink absorber, follow these steps:

1. Turn Off the Printer: Ensure the printer is turned off and unplugged from the power source.
2. Locate the Ink Absorber: The ink absorber is usually located at the bottom of the printer. Refer to the printer's manual or online resources for precise information.
3. Clean or Replace: If the ink absorber is removable, clean it with a soft cloth or replace it if necessary. Make sure to clean any surrounding areas as well.
4. Reassemble and Test: After cleaning, reassemble the printer and turn it on. Check if the error persists.

If cleaning or replacing the ink absorber doesn't resolve the issue, you may need to reset the cleaning counter or use the Canon Service Tool 3400 to clear the error code.

Using Canon Service Tool 3400

Canon's Service Tool 3400 is designed to reset various printer settings, including the cleaning counter. Here's how to use the tool effectively:

1. Enter Service Mode: To put the printer in service mode, press and hold the reset button six times. This step is crucial, and any deviation might prevent the tool from working correctly.
2. Launch the Service Tool 3400: After entering service mode, launch the Service Tool 3400 on your computer. Ensure you have the correct drivers installed.
3. Reset the Cleaning Counter: Use the tool to reset the cleaning counter, which should clear the P07 error. If the program isn't responding or displaying an error message, try entering service mode again to ensure proper initialization.

Addressing Common Issues

If the Service Tool 3400 fails to work in service mode, but allows some interaction in another mode (such as clicking the reset button four times), consider these troubleshooting tips:

• Check Connections: Ensure the printer is connected to the computer correctly, and there are no loose cables.
• Verify Software Compatibility: Make sure the Service Tool 3400 is compatible with your printer model and operating system.
• Restart Devices: Sometimes, a simple restart of the printer and computer can resolve software-related issues.
• Seek Professional Help: If the error persists or you encounter a new error code, consider contacting a Canon service center or a professional technician for further assistance.

Stay Connected with BC Technologies

For more technology-related content and troubleshooting guides, follow our YouTube Channel BC Technologies. Stay updated with our Tech blog, or visit us locally in Greensboro, North Carolina, for in-person assistance.