Waste Ink Tank Resetter for Epson Maintenance Box T6710 T671000 T6711 T671100 Workforce Pro Printer (AS-RESET-MB5)
Works with Epson Workforce Pro
Maintenance Tank Chip Resetter for Epson Maintenance Box
A maintenance box stores waste ink that gets flushed from the printer. When a printer expects the box to be full, it will stop working until the box is replaced.
Error messages like "Epson ink pad is at the end of its service life", or 'parts inside the printer have reached the end of their service life' are some examples of such issue.
This resetter is a hardware solution that we take the maintenance box out and reset the waste ink pad counter on the chip.
The procedure is simple: take the maintenance box out and find the chip. Put the chip on this resetter and press down. Hold it for few seconds and the counter will be reset to zero.
Watch this video see how it is lined up. The maintenance box T6711 has 9-pins and the MB5 resetter has 7 pins. You need to skip the left pins to reset (as shown in the video).
The resetter only works with these models (Doesn't work for models not listed here):
Waste Tank model: T6710 T6711 (T671100 is the same as T6711)
Compatible Printer models:
WorkForce ET-16500 EcoTank Wide-format All-in-One Supertank Printer
WorkForce Pro WF-4630 All-in-One Printer
WorkForce Pro WF-4640 All-in-One Printer
WorkForce Pro WF-5110 Network Wireless Color Printer
WorkForce Pro WF-5190 Network Color Printer with PCL/Adobe PS
WorkForce Pro WF-5620 Network Multifunction Color Printer
WorkForce Pro WF-5690 Network Multifunction Color Printer with PCL/Adobe PS
WorkForce Pro WF-M5194 Workgroup Monochrome Printer
WorkForce Pro WF-M5694 Multifunction Monochrome Printer
WorkForce Pro WF-R4640 EcoTank All-in-One
WorkForce Pro WF-R5190 Replaceable Ink Pack System
WorkForce Pro WF-R5690 Replaceable Ink Pack System
WorkForce Pro WP-4010 Network Color Printer
WorkForce Pro WP-4020 Inkjet Printer
WorkForce Pro WP-4023 Network Wireless Color Printer
WorkForce Pro WP-4090 Network Color Printer with PCL
WorkForce Pro WP-4520 Network Multifunction Color Printer
WorkForce Pro WP-4530 All-in-One Printer
WorkForce Pro WP-4533 Network Multifunction Wireless Color Printer
WorkForce Pro WP-4540 All-in-One Printer
WorkForce Pro WP-4590 Network Multifunction Color Printer with PCL
WorkForce WF-3540 All-in-One Printer
WorkForce WF-3620 All-in-One Printer
WorkForce WF-3640 All-in-One Printer
WorkForce WF-7110 Inkjet Printer
WorkForce WF-7210 Wide-format Printer
WorkForce WF-7510 All-in-One Printer
WorkForce WF-7610 All-in-One Printer
WorkForce WF-7620 All-in-One Printer
WorkForce WF-7710 Wide-format All-in-One Printer
WorkForce WF-7720 Wide-format All-in-One Printer
Worked perfect. Took a few tries to line it up perfectly, but took about 5 minutes and my printer is back to functional order, saving me from buying a new waste tank every time (I don't even use a waste tank, I have a continuous ink system). Thank you!
I received the resetter. I am surprised there is no stuff to put the resetter on the tank. So, it is difficult to put it exactly and steady.
I used it and it works, but it's hard to use. Perhaps is it possible to find small parts to position simply the resetter.
PS : my printer is WF-7610 DWF and the tank part is T6711 PXMB3