Roll over image to zoom in
Printhead Protector Guard - Protective Cover for T1881 PH: WF-7720 WF-7710 WF-7111 WF-7610 WF-7620 WF-3640 WF-3720
*** Prevent your printer against error 0x9A or 031006** Protect the printhead cable from the ink backsplash.The ink will accumulate on the bottom of the printhead when you print. Eventually,...
$9.99
SKU:
AS-PHC-T1881
Categories:
Tags:
*
** Prevent your printer against error 0x9A or 031006
** Protect the printhead cable from the ink backsplash.
The ink will accumulate on the bottom of the printhead when you print. Eventually, it will either flow towards the FFC cable or wipe out by the capping station. However, when too much ink is accumulated, the ink can get into the FFC cable connection and short-circuit the mainboard. In that case, you will need a printhead replacement, FFC cable replacement, and mainboard replacement (Error 0x9A or 031006), or say you will need a new printer.
This cover is called the Jesus of the printheads because it SAVES. To install, simply:
1) Remove the FFC cable
2) Loop the cover through the cable
3) Install the cable back to the printhead as usual
4) Slide the cover on the printhead.
5) Suggestion: use silicone sealant to seal the edge of the cover and around the FFC cable.
*
*
** Prevent your printer against error 0x9A or 031006
** Protect the printhead cable from the ink backsplash.
The ink will accumulate on the bottom of the printhead when you print. Eventually, it will either flow towards the FFC cable or wipe out by the capping station. However, when too much ink is accumulated, the ink can get into the FFC cable connection and short-circuit the mainboard. In that case, you will need a printhead replacement, FFC cable replacement, and mainboard replacement (Error 0x9A or 031006), or say you will need a new printer.
This cover is called the Jesus of the printheads because it SAVES. To install, simply:
1) Remove the FFC cable
2) Loop the cover through the cable
3) Install the cable back to the printhead as usual
4) Slide the cover on the printhead.
5) Suggestion: use silicone sealant to seal the edge of the cover and around the FFC cable.
*
*
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
I have an old Epson ET-2750 eco tank printer, which I have used for years, and since it is uses refillable ink tanks, have used very little ink over the years. I love this printer because I can print lots and lots of pages, including double-sided at very low cost, and it is very reliable. I recently had a paper jam, which is very unusual. When I took off the back panel to clear the jam, I accidentally dropped it on the floor, and when I replaced the back panel, the printer jammed every time I tried to print double-sided. I found a small plastic piece on the floor that fit on one end of the roller, but didn't realize I was missing the other end. I eventually noticed that there was a gear on the back panel next to where the roller fits into the panel. I deduced that I must be missing a gear to pop into the end of the roller, to mesh with the gear on the panel. I couldn't find the missing gear anywhere, and figured my cats must have lost it or my wife might have swept it up when sweeping the floor, and discarded it. Through a Google search, I found BCH Technologies, ordered the part from them, it fit perfectly, and now I can print double-sided again on my faithful old Epson printer. I very much appreciated being able to get the missing part from them. I thought the price for the part and shipping was high for such a small part, but that was the only down side.
Daniel Parker
Duplex Roller Feed Gear for Epson Printers
Best place for parts and accessories I ordered this print head carriage after watching a few bch videos wanted to fix and upgrade my cr encoder sensor while i was at it and i was not let down censor is original and whole assembly is new and never been used could not be happier thank you thanks Kevin!!
Josie Franco
New Genuine L1800 Printhead Carriage Return (CR) Unit
As always, great quality products, quick delivery and customer support that is top notch.
Shelley J Fenner
12V Peristaltic Pump for DTF/DTG Printers - White Ink Management System