Roll over image to zoom in
3D Printed & Epoxy Coated: White Ink Roller Attachment - 500 ml Single Bottle
This is a 3D printed, finished product. It is printed and then coated with epoxy, taking 3-5 days to print and 24 hours for the epoxy to dry. Therefore, the...
$15.99
SKU:
3D-Printed-WIRA-500x1
Categories:
- This is a 3D printed, finished product. It is printed and then coated with epoxy, taking 3-5 days to print and 24 hours for the epoxy to dry. Therefore, the shipping date will be approximately 7 days after purchase.
- For wear and tear, you may want to recoat the epoxy. Click here for an Epoxy Kit. However, ours has been running for a few months without needing recoating.
- This is only an attachment; the Rock Tumbler and bottles are not included.
- The file can be used as a roller/tumbler attachment (see video below) for a National Geographic type rock Tumbler. It may not fit other brands of rollers. Tested Compatible Products.
- The attachment fits the bottle: https://16wht3gau7.mybigcommerce.com//extra-large-open-top-500-ml-clear-pete-bottle-for-waste-tank/ The bottle is labeled "open top," but includes a cap with a semi-cut raised port. If the port is left uncut, the bottle remains airtight and can securely hold liquid without leaking.
- This product works for a single bottle.
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
VERY VERY SUPER PRODUCT. I purchased this product from Kevin and I can always say that Kevin is the best. Kevin definitely creates the best videos on the web. He has the best products and I always buy from him. Kevin also always recommends the best methods. I always recommend buying BCH TECHNOLOGIES products to always have perfect printers.
Alessandro Rivolta
Instruction Sheet for L1800 / 1390 Printhead Testing with Multimeter (Digital Download) Instant Download — Delivered to Your Email
Best thing ever!! i used to put cleaning solution in the capping station with a syringe/hose then had to suck out f the wast line with a syringe.... over and over until the capping station was clean. maybe up to 10 times. now i just use maybe 1 or 2 - 30ml syringes full of water and the pump cleans it out so good.... then I put capping solution, place printhead over capping station and turn on the back of the machine. thats it. when i print again, usually next day, I pull from waste tank a few times until I get ink, then i run 1 head cleaning , print a test strip and usually good to go. I sometimes print a 2nd test strip. SO MUCH easier to use this little pump. so glad I bought it.
RUTH FIGUEROA
TMS Printhead Maintenance System by BCH: Comprehensive Cleaning and Maintenance Solution
This is a must have modification to save time troubleshooting. You will need to download Kevin's capping station video to disassemble the capping station. A definite must. You will also need a few other connections to hook this up. All parts are linked in his videos. Pro tip. Have patience and go slow. This modification will save you from a lot of headaches . I did this mod on Procolored L1800 about a year old . Thanks Kevin.
Vincent Kretlow
Waste Ink Collection Tank Combo with Small Tube for Epson (AS-EP-WASTE-25MM)