5-Pin Vertical Connect Epson WiFi WLU6320-D69 Wireless LAN Module WIFI Card with a Vertical Connector

• Only parts in the pictures are included.  What you see is what you get.
• This one has a connector vertical to the board (see picture). Do not confuse it with horizontal connector models.
• The vertical connector is for you to plug the board directly on the mainboard.

Widely used in Epson WorkForce, EcoTank and XP series such as:

• ET-2650
• L4150
• Pro WF-6090
• WF-2760, WF-2630, WF-2650
• WF-463x Series: WF-4630, WF-4633...
• XP-440

Hardware Revision & Version number may vary. Suggestions: use a phone to zoom in and read the model number, then decide how many pins (count it on the connector) and if the connector is horizontal or vertical.

If you cannot find a horizontal connector version, you will need to plug this board into a connection wire. The board has 5 pins. Some models only need 4-pins and the left most pin (see picture 1) is not used. Therefore, you will see a 4-pin wire inserted into a 5-pin connector.