Roll over image to zoom in
Essential Brackets Kit for KevinV2 ET-8550 Conversion
3D Printed Mounting & Organization SystemThis kit includes the essential 3D printed brackets designed specifically for the KevinV2 ET-8550 DTF conversion.These components improve internal layout, protect critical electronics, and make...
$35.99 $59.99
3D Printed Mounting & Organization System
This kit includes the essential 3D printed brackets designed specifically for the KevinV2 ET-8550 DTF conversion.
These components improve internal layout, protect critical electronics, and make future maintenance significantly easier.
What This Kit Does
The KevinV2 bracket system is designed to:
• Relocate the mainboard from the bottom of the ET-8550
• Reduce risk of ink drips contacting the mainboard
• Improve serviceability and future repairs
• Organize ink tubes and wiring cleanly
• Secure relay and circulation components properly
This is a structural upgrade for serious KevinV2 builds.
What's Included
Mainboard Relocation Brackets (Front & Back)
• Moves the mainboard out of the bottom of the printer
• Reduces exposure to ink drips
• Provides easier access for troubleshooting and repair
Waste Tank & White Ink Filter Holder
• Secures waste tank bottle
• Holds white ink filter in a stable position
• Prevents loose components inside the chassis
DBJ-Type Bottle Cap (Tube Management Cap)
• Designed for DBJ-type bottles
• Integrated tube holders
• Keeps tubes secured to the bottle
• Allows easy removal when needed
Wire Management Brackets (4x)
• Secures electrical wiring
• Prevents loose wires from contacting moving parts
• Cleaner and safer internal layout
Relay C Brackets
• Secures Relay Board C firmly
• Prevents vibration movement
Ink Tube Organization Brackets (4x)
• Keeps ink tubes aligned and separated
• Reduces tangling
• Improves maintenance access
Drag Chain Components
• Drag Chain Head Adapter
• Drag Chain Head Door
Designed to hold maintenance dampers securely on the drag chain assembly.
Important Notes
• Designed for KevinV2 ET-8550 conversion layout
• 3D printed components
• Hardware (screws, electronics, bottles, relay boards, drag chain, etc.) not included unless specified
• Printer and conversion parts sold separately
Who This Is For
✔ Builders following the KevinV2 series
✔ Users relocating the ET-8550 mainboard
✔ Anyone wanting a cleaner, safer internal layout
✔ Advanced DIY DTF builders
This bracket kit helps transform the ET-8550 into a more serviceable, organized, and maintenance-friendly KevinV2 DTF system.
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
Best thing ever!! i used to put cleaning solution in the capping station with a syringe/hose then had to suck out f the wast line with a syringe.... over and over until the capping station was clean. maybe up to 10 times. now i just use maybe 1 or 2 - 30ml syringes full of water and the pump cleans it out so good.... then I put capping solution, place printhead over capping station and turn on the back of the machine. thats it. when i print again, usually next day, I pull from waste tank a few times until I get ink, then i run 1 head cleaning , print a test strip and usually good to go. I sometimes print a 2nd test strip. SO MUCH easier to use this little pump. so glad I bought it.
RUTH FIGUEROA
TMS Printhead Maintenance System by BCH: Comprehensive Cleaning and Maintenance Solution
This is a must have modification to save time troubleshooting. You will need to download Kevin's capping station video to disassemble the capping station. A definite must. You will also need a few other connections to hook this up. All parts are linked in his videos. Pro tip. Have patience and go slow. This modification will save you from a lot of headaches . I did this mod on Procolored L1800 about a year old . Thanks Kevin.
Vincent Kretlow
Waste Ink Collection Tank Combo with Small Tube for Epson (AS-EP-WASTE-25MM)
I purchased this product and messed it up first time. I somehow got superglue onto the main circuit board on the colour cartridge and for some reason (not sure how) I messed up the black one too. I repurchased the product (x2). I tried again with the colour one first (which is meant to be the most difficult). I was careful to wrap the circuit board and print head in cling film and taped it down on top. I was careful with the superglue and let it dry upside down for 24 hours so that if the glue leaked anywhere it wouldn't go towards the circuit board. It works great. I now have a functioning refillable colour cartridge. I am glad I got the hardest one out of the way first. I will shortly try the black one. But fantastic that overall, I know this product will save me a fortune in printing now. The colour one is obviously the hardest and it works! Good job guys. (I am from the UK which is why we spell colour with a u lol).
Daniel Cunningham
Modification Kit for Making Spongeless Cartridge with Canon PG-210 CL-211 PG-240 CL-241 PG-245 CL-246 PG-243 CL-244 PG-260 CL-261 PG-275 CL-276