DTF Printer Timer Controller for Mixer & White Ink Pump - Plug-and-Play with Easy Wire Connectors, Reprogrammable with Instructions Included

Upgrade your DTF printer with this versatile DTF Printer Timer Controller, designed to optimize the performance of your mixer and white ink pump. This unit is pre-programmed with an ideal cycle of 3 minutes off and 35 seconds on, ensuring consistent operation while minimizing wear and tear. It's a perfect solution for maintaining white ink circulation and preventing clogs.

Key Features:

• Pre-Programmed for Optimal Performance: The timer comes pre-set with a cycle tailored for DTF printers, but it can also be reprogrammed to suit your specific needs.
• Plug-and-Play Design: Installation is simple-just place the unit between your power source and the working component. It takes power from your existing power source and  compatible with a wide range of voltages, from 6V to 30V,
• Easy Wire Connectors: No soldering or complex wiring required. Cut the wire, strip the ends, press the white clip on the connector, insert the wire, and release-installation is complete in minutes!
• Reprogrammable Settings: Want to adjust the timer? No problem! This unit is fully reprogrammable, and easy-to-follow instructions are included with your purchase.
• Energy Efficient and Quiet: By operating only when needed, this timer reduces power consumption, minimizes noise levels, and prolongs the life of your printer's components. The intermittent operation eliminates the need for a constant stirrer, keeping the white ink properly mixed without unnecessary wear on the equipment.
• Versatile Compatibility: Designed for both mixers and white ink pumps, making it an all-in-one upgrade for your DTF printer.
• Whether you're a seasoned DTF printer enthusiast or new to the process, this timer controller is an essential upgrade for maintaining efficiency and protecting your investment.

What's Included:

• DTF Printer Timer Controller
• Wire Connectors for Easy Installation
• Programming Instructions

Simplify your DTF printer maintenance and optimize your workflow with this reliable, customizable timer controller!

Installation Instructions

Power Input

• Voltage Range: Compatible with power sources between 6V and 30V.

• Typical Supply: Use a 12V or 24V power adapter.

• Current Requirement:

• A power supply with 1A output is sufficient for mixers and white ink pumps.

• For additional high-energy devices, such as heaters, check the device's amp requirements and adjust the power supply accordingly to ensure sufficient output.

Connection Options:

1. Option 1: Plug a power adapter directly into the timer.

2. Option 2: Tap into an existing power line from your printer’s mainboard using the quick-connect/release connector.

Important: Do not use both connection options simultaneously. Choose either a power adapter or the mainboard power tap to prevent damage to the timer or connected devices.

Using the Quick Connector for Input

1. Press down the white tab on the connector.

2. Insert the wire into the bottom slot and release the tab to secure it.

Output Connection

• Multiple Devices: Twist all output wires together before inserting them into the quick connector.

• Important: Ensure the red wire on the input matches the red wire on the output. Reversing polarity may cause the motor to spin backward, which could affect its operation.

Using the Quick Connector for Output

1. Press down the white tab on the connector.

2. Insert the wires into the appropriate slot and release the tab.