Roll over image to zoom in
Glue + Gloves + Sandpaper + Rubber Bands
For your convenience. Cartridge MOD Convenience Package Includes: 1 pair of gloves 1 tube of glue 1 piece of sandpaper 2 rubber bands Gloves One pair of Kimberly-Clark® Powder-Free...
$9.99
SKU:
AS-PARTS-GGSR
Categories:
Tags:
For your convenience.
Cartridge MOD Convenience Package
Includes:
- 1 pair of gloves
- 1 tube of glue
- 1 piece of sandpaper
- 2 rubber bands
Gloves
- One pair of Kimberly-Clark® Powder-Free Nitrile-Xtra Gloves
- Medium
- Proper use consistent with NFPA 1500 and 29 CFR 1910.132 General requirements of subpart I, Personal Protective Equipment
- Must wear gloves for the Super Glue
Glue:
- One tube of 2 g (0.07 oz) Super Glue with precision applicator
- Enough for 5 sets of cartridges (Black & Color)
- Apply to clean and dry surfaces
- Press parts together for at least 15 seconds
- Use the rubber band to hold the cover and cartridge for at least 2 hours
- Wear gloves. Wear eye protection. Keep out of the reach of children.
Warning: Contains Cyanoacrylate. May cause an allergic skin reaction.
Directions: Tube opens when cap/nozzle are screwed onto the tube. The tube must be pierced before using. Point tube away from face and body. Do not squeeze tube while puncturing. To puncture, screw nozzle and cap assembly onto tube completely. To use, remove the outer cap. Clean tip after use. Replace outer cap and store in cool, dry place. Do not spread glue with fingers.
For accidental eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover and gently peel adhesive off with the fingernail; water exposure with wear off residual adhesive within a few days. Do not use polish remover around the eye area. For ingestion, do not induce vomiting; call a physician.
Fingers Bounded? Soak bonded skin with warm soapy water. Gently massage bonded fingers back-and-forth to "peel" bound apart. Use rolling, peeling motion - do not pull!
Sandpaper
- One piece of 150 grit sandpaper by 3M®
- 3M® PRO Grade Precision
- Made in USA or Canada
- Lasts 3-5 times longer than other sandpapers (our experience)
Rubber bands
- Two pieces of rubber bands
Related products
Add your product to the cart to view shipping rates. We've delivered to 289,762 customers in 149 countries.
Weekly Promotion
Sign up for our newsletter to get weekly coupons and tips on printer refills and repairs.
Got a question? Don't hesitate to email us at support@bchtechnologies.com
Subscribe to Kevin's YouTube channel for the latest tips on printer repair and maintenance.
Recently viewed
GREAT!!!!! I've been using this ink for my Epson printer and my aunts printer for 4 years now. I've found no faults with it .No bleed through or fading, It just works.
Robert Webb
Standard 600 ml 4-Color Refill Ink for All Printers (KD600X-CU)
Great!! Worked like it supposed too!! You guys been a great service to the people that like to work on equipment that they bought for personal use! Or maybe work environment!... and I'll be advertising for BCH on how prompt and educational you guys are!!.... thank you for your service!!
Rodney DuBois
Transistor Pair C6144 (2SC6144) and A2222 (2SA2222) for Epson EcoTank & WorkForce WF-2630
The main board works again! Prior to purchasing the main board, my Epson WF-3640 would give the 0x9a error code, which I deduced was due to a short-circuited clogged printhead, that blew out the fuse on the main board. Disassembling the printer, I had checked the main board fuse with a multimeter and sure enough, it was blown. So, I chose to buy a main board from BCH, as I was sure I could not fix the fuse itself. I also bought some new cables for the print head/main board as one of them looked burnt where it was inserted in the print head. I purchased a used printhead elsewhere, though, as BCH didn't seem to have one in stock. After installation, the printer worked again, though the used printhead--again purchased elsewhere--was clogged. I can't blame that on BCH, which is why I stress that I purchased the printhead elsewhere. Nevertheless, everything from BCH worked perfectly. It may work too perfectly, for when I initially powered up the unit without ink cartridges, I didn't get any error message saying to install cartridges. I don't know why that is. It could be just the way the WF-3640 works and I had never noticed it before, but once everything was installed, it merely said the nozzle and/or printhead was clogged and asked me to run a cleaning. All in all, I am very satisfied and would purchase from BCH again should I have the need to do so. Lastly, the YouTube videos and BCH website instructions were spot on! I had initially wired back the mainboard incorrectly but I re-watched the video and found my error before I powered up the unit. My only regret is that I accidentally may have left the "Anonymous Anonymous" review below without adding text, which I have remedied with this comment.
David Ahmad
Epson CD16 Main Board for WorkForce WF-3640 Logic Formatter Motherboard